[Sun Nov 27 10:56:47 2011] Detection parameters:
  Position = (240.6, 287.9) = 8 41 2.49 13 13 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 19.3
  Background counts = 85.4
  Rate = 0.005 +/- 0.0007

[Sun Nov 27 10:56:47 2011] Off-axis axis estimate = 4.26'
[Sun Nov 27 12:02:10 2011] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 12:02:10 2011] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Nov 27 12:02:10 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sun Nov 27 12:02:10 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.56"
[Sun Nov 27 12:25:35 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Nov 27 12:25:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7.csv
[Sun Nov 27 12:25:35 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Nov 27 12:25:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7.csv
[Sun Nov 27 12:25:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 12:25:35 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Nov 27 12:25:35 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Nov 27 12:25:35 2011] Fit fullrun_mos2_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Nov 27 12:25:48 2011] Source 7 is offset by -7.232685 and 6.789279 pixels which is larger than
2 X fitted extent = 0.983706 x 0.983706, not incorporating fit results
[Sun Nov 27 12:25:48 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 12:25:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 12:25:48 2011] Assessing source extent using major
[Sun Nov 27 12:25:48 2011] Source does appear to be extended
[Sun Nov 27 12:25:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 13:12:00 2011] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 13:12:00 2011] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Nov 27 13:12:00 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sun Nov 27 13:12:00 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 8.56"
[Sun Nov 27 13:30:48 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Nov 27 13:30:48 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Nov 27 13:30:48 2011] Fit fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_src7 appears to have run properly
[Sun Nov 27 13:30:48 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Nov 27 13:30:48 2011] fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Nov 27 13:30:48 2011] Fit fullrun_mos2_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Nov 27 13:30:59 2011] Source 7 is offset by -7.232685 and 6.789279 pixels which is larger than
2 X fitted extent = 0.983706 x 0.983706, not incorporating fit results
[Sun Nov 27 13:30:59 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 86.846287 pixels away
[Sun Nov 27 13:30:59 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 13:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 13:30:59 2011] Assessing source extent using major
[Sun Nov 27 13:30:59 2011] Source does appear to be extended
[Sun Nov 27 13:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 14:13:12 2011] XMMSAS src. selection expression = ellipse(20886.914444, 25000.509308, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 14:13:12 2011] Writing source region out to fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7_src.reg
[Sun Nov 27 14:13:12 2011] Extracting stamp from image fullrun_mos2_xmm0147670301_pi300-10000_cl_sm2.00.img.gz, (203, 250) - (278, 325)
[Sun Nov 27 14:13:12 2011] XMMSAS bgd. selection expression = annulus(20886.914444, 25000.509308, 1087.500000, 2175.000000, X, Y) && !ellipse(23310.806043, 27029.721123, 462.809485, 391.673459, 71.132638, X, Y)
[Sun Nov 27 14:13:12 2011] Writing fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7.gif
[Sun Nov 27 14:15:47 2011] Mean detx,y = (-3934.57, -1885.97) 
[Sun Nov 27 14:15:49 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 14:16:03 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 14:16:03 2011] Setting source spectrum file to fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Nov 27 14:16:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Nov 27 14:31:48 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Nov 27 14:31:48 2011] rmf not generated due to insufficient counts
[Sun Nov 27 14:38:40 2011] Updating aperture counts using extracted products
[Sun Nov 27 14:38:40 2011] Error reading totcts from fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Nov 27 14:38:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 14:38:41 2011] Using photon index=1.80, rate=0.00519, arf fullrun_mos2_xmm0147670301_pi300-10000_pass1_cl_src7.arf
[Sun Nov 27 14:38:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 14:38:41 2011] Updating source flux to 6.1e-14
[Sun Nov 27 14:38:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting