[Sun Nov 27 10:56:10 2011] Detection parameters:
  Position = (320.8, 452.8) = 8 40 38.60 13 25 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 14.9
  Background counts = 57.0
  Rate = 0.003 +/- 0.0005

[Sun Nov 27 10:56:10 2011] Off-axis axis estimate = 11.31'
[Sun Nov 27 11:38:04 2011] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 11:38:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 11:38:04 2011] Initial guess for spatial extent in simple fitting = 12.08"
[Sun Nov 27 11:38:04 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.838
[Sun Nov 27 11:38:04 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.08"
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8.ximg exists
[Sun Nov 27 12:02:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8.csv
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Nov 27 12:02:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8.csv
[Sun Nov 27 12:02:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Nov 27 12:02:10 2011] Fit fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Nov 27 12:25:45 2011] Spatial fit model total counts = 164.518000, observed total counts = 174.000000
[Sun Nov 27 12:25:45 2011] Offset between fit and detection position for source 7 = 4.065059 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 4.065059 pixels
  Position = (318.6, 456.2) = 8 40 39.24 13 25 26.2
  Extent = 18.1 (13.6-21.7)", rotation angle = 0
  Source counts = 146.5 +/- 12.1
  Background counts = 0.0
  Rate = 0.009 +/- 0.0008
 Deleting source due to low signal-to-noise ratio