[Sun Nov 27 10:56:10 2011] Detection parameters:
  Position = (268.7, 311.3) = 8 40 54.14 13 14 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.6 +/- 28.8
  Background counts = 87.1
  Rate = 0.02 +/- 0.001

[Sun Nov 27 10:56:10 2011] Off-axis axis estimate = 2.35'
[Sun Nov 27 11:38:04 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 11:38:04 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Nov 27 11:38:04 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.237
[Sun Nov 27 11:38:04 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.60"
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Nov 27 12:02:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Nov 27 12:02:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 12:02:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Nov 27 12:02:10 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Nov 27 12:02:10 2011] Fit fullrun_mos1_xmm0147670301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Nov 27 12:25:45 2011] Source 4 is offset by 7.655446 and -6.400618 pixels which is larger than
2 X fitted extent = 0.874000 x 0.874000, not incorporating fit results
[Sun Nov 27 12:25:45 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 12:25:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 12:25:45 2011] Assessing source extent using major
[Sun Nov 27 12:25:45 2011] Source does appear to be extended
[Sun Nov 27 12:25:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 12:54:16 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 12:54:16 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Nov 27 12:54:16 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.237
[Sun Nov 27 12:54:16 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.60"
[Sun Nov 27 13:12:00 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3.ximg exists
[Sun Nov 27 13:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 13:12:00 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Nov 27 13:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 13:12:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 13:12:00 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Nov 27 13:12:00 2011] fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Nov 27 13:12:00 2011] Fit fullrun_mos1_xmm0147670301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Nov 27 13:30:56 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 39.334342 pixels away
[Sun Nov 27 13:30:56 2011] Source 4 is offset by 7.667239 and 6.285129 pixels which is larger than
2 X fitted extent = 0.874000 x 0.874000, not incorporating fit results
[Sun Nov 27 13:30:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 13:30:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 13:30:56 2011] Assessing source extent using major
[Sun Nov 27 13:30:56 2011] Source does appear to be extended
[Sun Nov 27 13:30:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 14:01:59 2011] XMMSAS src. selection expression = ellipse(23326.247833, 27034.004211, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 14:01:59 2011] Writing source region out to fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4_src.reg
[Sun Nov 27 14:01:59 2011] Extracting stamp from image fullrun_mos1_xmm0147670301_pi300-10000_cl_sm2.00.img.gz, (231, 274) - (306, 349)
[Sun Nov 27 14:01:59 2011] XMMSAS bgd. selection expression = annulus(23326.247833, 27034.004211, 1087.500000, 2175.000000, X, Y) && !ellipse(20852.144200, 24988.920340, 564.257616, 266.305608, 312.136487, X, Y)
[Sun Nov 27 14:01:59 2011] Writing fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4.gif
[Sun Nov 27 14:02:59 2011] Mean detx,y = (-3104.61, 912.73) 
[Sun Nov 27 14:03:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 14:03:16 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 14:03:17 2011] Setting source spectrum file to fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Nov 27 14:03:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Nov 27 14:12:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Nov 27 14:12:46 2011] rmf not generated due to insufficient counts
[Sun Nov 27 14:38:39 2011] Updating aperture counts using extracted products
[Sun Nov 27 14:38:39 2011] Error reading totcts from fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Nov 27 14:38:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 14:38:39 2011] Using photon index=1.80, rate=0.0157, arf fullrun_mos1_xmm0147670301_pi300-10000_pass1_cl_src4.arf
[Sun Nov 27 14:38:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 14:38:39 2011] Updating source flux to 1.7e-13
[Sun Nov 27 14:38:42 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting