[Fri Jun  8 21:38:22 2012] Detection parameters:
  Position = (346.3, 462.2) = 23 31 52.19 19 56 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43891.4 +/- 248.2
  Background counts = 19.2
  Rate = 3 +/- 0.02

[Fri Jun  8 21:38:23 2012] Off-axis axis estimate = 12.37'
[Fri Jun  8 21:40:17 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:40:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 21:40:17 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Jun  8 21:40:17 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.060
[Fri Jun  8 21:40:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.61"
[Fri Jun  8 23:46:21 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  8 23:46:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 23:46:21 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  8 23:46:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 23:46:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 23:46:22 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  8 23:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 23:46:22 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  8 23:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 23:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 01:14:54 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Jun  9 01:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 01:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 01:14:54 2012] Assessing source extent using major
[Sat Jun  9 01:14:54 2012] Source does appear to be extended
[Sat Jun  9 01:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 01:15:21 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 01:15:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 01:15:21 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Sat Jun  9 01:15:21 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.060
[Sat Jun  9 01:15:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.61"
[Sat Jun  9 03:48:03 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  9 03:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 03:48:03 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  9 03:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 03:48:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:48:04 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  9 03:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 03:48:04 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  9 03:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 03:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 04:55:11 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Jun  9 04:55:11 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.364310 pixels away
[Sat Jun  9 04:55:11 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 04:55:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 04:55:11 2012] Assessing source extent using major
[Sat Jun  9 04:55:11 2012] Source does appear to be extended
[Sat Jun  9 04:55:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 04:55:25 2012] Counts = 43891.429688, rescaling region sizes by 3.000000
[Sat Jun  9 04:55:25 2012] XMMSAS src. selection expression = ellipse(30080.591919, 40161.276184, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Jun  9 04:55:25 2012] Writing source region out to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  9 04:55:25 2012] Extracting stamp from image fullrun_pn_xmm0147580301_pi300-10000_cl_sm2.00.img.gz, (234, 350) - (459, 575)
[Sat Jun  9 04:55:25 2012] XMMSAS bgd. selection expression = annulus(30080.591919, 40161.276184, 9787.500000, 19575.000000, X, Y) && !ellipse(31880.245117, 39608.777863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.947980, 26265.907800, 400.671212, 400.671212, 0.000000, X, Y) && !ellipse(24365.814200, 23447.924200, 459.034413, 459.034413, 0.000000, X, Y) && !ellipse(18736.432312, 42500.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30965.725586, 41876.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.873400, 36445.286600, 1738.080050, 548.901616, 116.494100, X, Y) && !ellipse(36009.837200, 34400.380200, 401.608012, 401.608012, 0.000000, X, Y) && !ellipse(35045.382800, 32031.349400, 410.304812, 410.304812, 0.000000, X, Y) && !ellipse(27321.964600, 28969.037600, 491.593614, 491.593614, 0.000000, X, Y) && !ellipse(39433.038400, 26908.562600, 637.311218, 637.311218, 0.000000, X, Y) && !ellipse(31321.672089, 42752.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32793.973450, 39369.498657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22297.046180, 38691.218600, 399.992012, 399.992012, 0.000000, X, Y) && !ellipse(29098.804400, 38219.465800, 1863.680054, 484.944814, 117.763600, X, Y) && !ellipse(28795.128000, 37603.338000, 1760.112051, 1760.112051, 0.000000, X, Y) && !ellipse(27665.848000, 35338.572000, 1597.936046, 1597.936046, 0.000000, X, Y) && !ellipse(27435.602000, 34908.826000, 1538.560044, 1538.560044, 0.000000, X, Y) && !ellipse(27087.334000, 34422.516000, 1637.008047, 1637.008047, 0.000000, X, Y) && !ellipse(18905.808578, 34257.000793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.111800, 34045.474000, 1529.496044, 1529.496044, 0.000000, X, Y) && !ellipse(26717.858000, 33567.288000, 718.588821, 718.588821, 0.000000, X, Y) && !ellipse(26344.432307, 32827.294084, 1485.312043, 712.027088, 123.846850, X, Y) && !ellipse(26211.402000, 32719.188000, 1968.344057, 1968.344057, 0.000000, X, Y) && !ellipse(25666.260000, 31408.310000, 1374.576040, 549.090416, 293.162000, X, Y) && !ellipse(43455.453339, 31259.496613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.888641, 31089.157898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.382000, 30116.426000, 1336.008038, 1336.008038, 0.000000, X, Y) && !ellipse(19012.019260, 29707.763000, 393.441611, 393.441611, 0.000000, X, Y) && !ellipse(35161.742200, 28745.735240, 359.632810, 359.632810, 0.000000, X, Y) && !ellipse(24982.025219, 27137.652914, 646.152775, 215.016810, 311.606859, X, Y) && !ellipse(26236.903780, 27082.108000, 418.931212, 418.931212, 0.000000, X, Y) && !ellipse(31667.431244, 26818.354767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23964.840908, 26080.670400, 440.906413, 440.906413, 0.000000, X, Y) && !ellipse(37468.120500, 25260.488100, 341.927210, 341.927210, 0.000000, X, Y) && !ellipse(21304.270447, 23770.675842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21931.854640, 23196.359000, 381.274411, 381.274411, 0.000000, X, Y) && !ellipse(28576.583374, 23156.850358, 762.548822, 296.141600, 314.929893, X, Y) && !ellipse(28526.056335, 22307.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.478394, 21550.074387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21424.295900, 21375.692400, 636.778418, 636.778418, 0.000000, X, Y) && !ellipse(30215.539093, 43234.042480, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 04:55:25 2012] Writing fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2.gif
[Sat Jun  9 04:59:10 2012] Mean detx,y = (-3750.00, -13113.67) 
[Sat Jun  9 04:59:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 05:07:18 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 05:07:18 2012] Setting source spectrum file to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  9 05:07:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  9 05:32:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  9 05:32:32 2012] rmf not generated due to insufficient counts
[Sat Jun  9 06:38:36 2012] Updating aperture counts using extracted products
[Sat Jun  9 06:38:36 2012] Error reading totcts from fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  9 06:38:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 06:38:37 2012] Using photon index=1.80, rate=3.25, arf fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2.arf
[Sat Jun  9 06:38:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 06:38:37 2012] Updating source flux to 1.8e-11
[Sat Jun  9 06:39:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  9 06:41:10 2012] xmm0147580301/analysis//spectral/fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete