[Fri Jun 8 21:38:22 2012] Detection parameters: Position = (333.9, 438.0) = 23 31 56.03 19 54 28.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 70.8 +/- 13.9 Background counts = 17.8 Rate = 0.005 +/- 0.001 [Fri Jun 8 21:38:23 2012] Off-axis axis estimate = 10.44' [Fri Jun 8 21:40:17 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 21:40:17 2012] Initial guess for spatial extent in simple fitting = 11.65" [Fri Jun 8 21:40:17 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891 [Fri Jun 8 21:40:17 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.65" [Fri Jun 8 23:46:21 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src18.ximg exists [Fri Jun 8 23:46:21 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src18_1.ximg exists [Fri Jun 8 23:46:21 2012] Fit fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_src18 appears to have run properly [Fri Jun 8 23:46:22 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Fri Jun 8 23:46:22 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Fri Jun 8 23:46:22 2012] Fit fullrun_pn_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly [Sat Jun 9 01:14:54 2012] Spatial fit model total counts = 536.606000, observed total counts = 509.000000 [Sat Jun 9 01:14:54 2012] Offset between fit and detection position for source 18 = 2.192890 pixels [Sat Jun 9 01:14:54 2012] 537.107000 total counts/ 367.308000 bgd. counts: snr = 8.859719 Spatial fit parameters: Offset between fit and detection position for source 18 = 2.192890 pixels Position = (335.0, 439.9) = 23 31 55.67 19 54 35.5 Extent = 23.3 (23.3-46.6)" x 6.1 (4.8-7.7)", rotation angle = 118 (113-123) degrees Source counts = 169.8 +/- 23.2 Background counts = 367.3 Rate = 0.01 +/- 0.002 [Sat Jun 9 01:14:54 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 01:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 01:14:54 2012] Assessing source extent using major axis lower bound [Sat Jun 9 01:14:54 2012] Source does appear to be extended [Sat Jun 9 01:14:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.01 [Sat Jun 9 01:14:54 2012] Source is asymmetric [Sat Jun 9 01:14:54 2012] Source is confused with source 19 [Sat Jun 9 01:15:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 9 01:15:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 9 01:15:21 2012] Initial guess for spatial extent in simple fitting = 14.68" [Sat Jun 9 01:15:21 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.066 [Sat Jun 9 01:15:21 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 14.68" [Sat Jun 9 03:48:03 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18.ximg exists [Sat Jun 9 03:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18.csv [Sat Jun 9 03:48:03 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18_1.ximg exists [Sat Jun 9 03:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18.csv [Sat Jun 9 03:48:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 03:48:04 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Sat Jun 9 03:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18.csv [Sat Jun 9 03:48:04 2012] fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Sat Jun 9 03:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18.csv [Sat Jun 9 03:48:04 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 04:55:11 2012] Warning, spatial fit 18 centroid is now closest to src. 2 [Sat Jun 9 04:55:11 2012] Spatial fit model total counts = 1297.240000, observed total counts = 1005.000000 [Sat Jun 9 04:55:11 2012] Poor agreement between spatial fit and data for source 18 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 9 04:55:11 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 04:55:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 04:55:11 2012] Assessing source extent using major axis lower bound [Sat Jun 9 04:55:11 2012] Source does appear to be extended [Sat Jun 9 04:55:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.01 [Sat Jun 9 04:55:11 2012] Source is asymmetric [Sat Jun 9 04:55:25 2012] XMMSAS src. selection expression = ellipse(29098.804400, 38219.465800, 1397.760040, 363.708610, 117.763600, X, Y) [Sat Jun 9 04:55:25 2012] Writing source region out to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18_src.reg [Sat Jun 9 04:55:25 2012] Extracting stamp from image fullrun_pn_xmm0147580301_pi300-10000_cl_sm2.00.img.gz, (255, 360) - (415, 520) [Sat Jun 9 04:55:25 2012] XMMSAS bgd. selection expression = annulus(29098.804400, 38219.465800, 2329.600067, 4659.200134, X, Y) && !ellipse(30080.591919, 40161.276184, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31880.245117, 39608.777863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30965.725586, 41876.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.873400, 36445.286600, 1738.080050, 548.901616, 116.494100, X, Y) && !ellipse(31321.672089, 42752.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32793.973450, 39369.498657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28795.128000, 37603.338000, 1760.112051, 1760.112051, 0.000000, X, Y) && !ellipse(27665.848000, 35338.572000, 1597.936046, 1597.936046, 0.000000, X, Y) && !ellipse(27435.602000, 34908.826000, 1538.560044, 1538.560044, 0.000000, X, Y) && !ellipse(27087.334000, 34422.516000, 1637.008047, 1637.008047, 0.000000, X, Y) && !ellipse(26918.111800, 34045.474000, 1529.496044, 1529.496044, 0.000000, X, Y) && !ellipse(26717.858000, 33567.288000, 718.588821, 718.588821, 0.000000, X, Y) && !ellipse(26344.432307, 32827.294084, 1485.312043, 712.027088, 123.846850, X, Y) && !ellipse(26211.402000, 32719.188000, 1968.344057, 1968.344057, 0.000000, X, Y) && !ellipse(30215.539093, 43234.042480, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 9 04:55:25 2012] Writing fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18.gif [Sat Jun 9 05:15:14 2012] Mean detx,y = (-3770.50, -10972.41) [Sat Jun 9 05:15:17 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jun 9 05:16:07 2012] Binned source spectrum to 10 counts/bin [Sat Jun 9 05:16:07 2012] Setting source spectrum file to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Sat Jun 9 05:16:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18_bgd.pi.gz [Sat Jun 9 06:38:36 2012] Updating aperture counts using extracted products [Sat Jun 9 06:38:36 2012] Error reading totcts from fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Sat Jun 9 06:38:37 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jun 9 06:38:37 2012] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0147580301_pi300-10000_pass1_cl_src18.arf [Sat Jun 9 06:38:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 9 06:38:37 2012] Updating source flux to 8e-14 [Sat Jun 9 06:39:17 2012] Flag p found in src. 18 procflags, skipping spectral fitting [Sat Jun 9 06:39:17 2012] Flag c found in src. 18 procflags, skipping spectral fitting