[Fri Jun  8 21:38:44 2012] Detection parameters:
  Position = (280.1, 270.2) = 23 32 12.60 19 42 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.5 +/- 12.7
  Background counts = 10.1
  Rate = 0.007 +/- 0.001

[Fri Jun  8 21:38:44 2012] Off-axis axis estimate = 2.44'
[Fri Jun  8 23:46:23 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:23 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Jun  8 23:46:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Fri Jun  8 23:46:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.65"
[Sat Jun  9 00:07:02 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun  9 00:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4.csv
[Sat Jun  9 00:07:02 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun  9 00:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4.csv
[Sat Jun  9 00:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 00:07:02 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun  9 00:07:02 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun  9 00:07:02 2012] Fit fullrun_mos1_xmm0147580301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jun  9 01:14:58 2012] Spatial fit model total counts = 132.000000, observed total counts = 132.000000
[Sat Jun  9 01:14:58 2012] Offset between fit and detection position for source 12 = 0.148880 pixels
[Sat Jun  9 01:14:58 2012] 132.815900 total counts/ 71.674900 bgd. counts: snr = 7.221859
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.148880 pixels
  Position = (280.2, 270.3) = 23 32 12.59 19 42 17.9
  Extent = 5.6 (4.1-6.9)", rotation angle = 0
  Source counts = 61.1 +/- 11.5
  Background counts = 71.7
  Rate = 0.004 +/- 0.0008
[Sat Jun  9 01:14:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 01:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 01:14:58 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 01:14:58 2012] Source does appear to be extended
[Sat Jun  9 01:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:48:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 03:48:05 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Sat Jun  9 03:48:05 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.945
[Sat Jun  9 03:48:05 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.58"
[Sat Jun  9 04:14:45 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun  9 04:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4.csv
[Sat Jun  9 04:14:45 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun  9 04:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4.csv
[Sat Jun  9 04:14:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 04:14:46 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun  9 04:14:46 2012] fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun  9 04:14:46 2012] Fit fullrun_mos1_xmm0147580301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Jun  9 04:55:14 2012] Spatial fit model total counts = 131.999000, observed total counts = 132.000000
[Sat Jun  9 04:55:14 2012] Offset between fit and detection position for source 12 = 0.008054 pixels
[Sat Jun  9 04:55:14 2012] 132.842600 total counts/ 72.130200 bgd. counts: snr = 7.148564
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.008054 pixels
  Position = (280.1, 270.3) = 23 32 12.59 19 42 17.9
  Extent = 5.5 (4.2-6.8)", rotation angle = 0
  Source counts = 60.7 +/- 11.5
  Background counts = 72.1
  Rate = 0.004 +/- 0.0008
[Sat Jun  9 04:55:14 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 04:55:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 04:55:14 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 04:55:14 2012] Source does appear to be extended
[Sat Jun  9 04:55:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 06:16:54 2012] XMMSAS src. selection expression = ellipse(24324.089180, 23467.155200, 329.841009, 329.841009, 0.000000, X, Y)
[Sat Jun  9 06:16:54 2012] Writing source region out to fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun  9 06:16:54 2012] Extracting stamp from image fullrun_mos1_xmm0147580301_pi300-10000_cl_sm2.00.img.gz, (261, 251) - (299, 289)
[Sat Jun  9 06:16:54 2012] XMMSAS bgd. selection expression = annulus(24324.089180, 23467.155200, 549.735016, 1099.470032, X, Y)
[Sat Jun  9 06:16:54 2012] Writing fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12.gif
[Sat Jun  9 06:22:28 2012] Mean detx,y = (-4300.09, -1693.81) 
[Sat Jun  9 06:22:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 06:22:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 06:22:36 2012] Setting source spectrum file to fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun  9 06:22:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun  9 06:29:13 2012] Not generating rmf since there are only 60 counts
[Sat Jun  9 06:29:13 2012] rmf not generated due to insufficient counts
[Sat Jun  9 06:38:37 2012] Updating aperture counts using extracted products
[Sat Jun  9 06:38:37 2012] Error reading totcts from fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun  9 06:38:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 06:38:37 2012] Using photon index=1.80, rate=0.00441, arf fullrun_mos1_xmm0147580301_pi300-10000_pass1_cl_src12.arf
[Sat Jun  9 06:38:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 06:38:37 2012] Updating source flux to 6.4e-14
[Sat Jun  9 06:38:39 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting