[Sun Aug  5 12:56:53 2012] Detection parameters:
  Position = (343.2, 384.2) = 13 39 22.16 27 34 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 7.5
  Background counts = 5.5
  Rate = 0.007 +/- 0.001

[Sun Aug  5 12:56:54 2012] Off-axis axis estimate = 7.01'
[Sun Aug  5 13:35:31 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 13:35:31 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Sun Aug  5 13:35:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 1.000
[Sun Aug  5 13:35:31 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.94"
[Sun Aug  5 13:49:59 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Aug  5 13:49:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6.csv
[Sun Aug  5 13:49:59 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Aug  5 13:49:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6.csv
[Sun Aug  5 13:49:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 13:49:59 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Aug  5 13:49:59 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Aug  5 13:49:59 2012] Fit fullrun_mos2_xmm0147580101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Aug  5 13:50:05 2012] Spatial fit model total counts = 57.008900, observed total counts = 52.000000
[Sun Aug  5 13:50:05 2012] Offset between fit and detection position for source 1 = 0.598610 pixels
[Sun Aug  5 13:50:05 2012] 57.310900 total counts/ 33.451700 bgd. counts: snr = 4.125217
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.598610 pixels
  Position = (342.8, 384.7) = 13 39 22.27 27 34 56.9
  Extent = 4.2 (2.7-6.5)", rotation angle = 0
  Source counts = 23.9 +/- 7.6
  Background counts = 33.5
  Rate = 0.003 +/- 0.001
[Sun Aug  5 13:50:05 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 13:50:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 13:50:05 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 13:50:05 2012] Source does appear to be extended
[Sun Aug  5 13:50:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 14:28:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 14:28:14 2012] Initial guess for spatial extent in simple fitting = 4.15"
[Sun Aug  5 14:28:14 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.064
[Sun Aug  5 14:28:14 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.15"
[Sun Aug  5 14:43:40 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Aug  5 14:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6.csv
[Sun Aug  5 14:43:40 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Aug  5 14:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6.csv
[Sun Aug  5 14:43:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 14:43:40 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Aug  5 14:43:40 2012] fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Aug  5 14:43:40 2012] Fit fullrun_mos2_xmm0147580101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Aug  5 14:43:47 2012] Spatial fit model total counts = 56.974400, observed total counts = 52.000000
[Sun Aug  5 14:43:47 2012] Offset between fit and detection position for source 1 = 0.008517 pixels
[Sun Aug  5 14:43:47 2012] 57.626100 total counts/ 33.728900 bgd. counts: snr = 4.114773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008517 pixels
  Position = (342.8, 384.7) = 13 39 22.27 27 34 57.0
  Extent = 4.2 (2.6-7.1)", rotation angle = 0
  Source counts = 23.9 +/- 7.6
  Background counts = 33.7
  Rate = 0.003 +/- 0.001
[Sun Aug  5 14:43:47 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 14:43:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 14:43:47 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 14:43:47 2012] Source does appear to be extended
[Sun Aug  5 14:43:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 15:02:45 2012] XMMSAS src. selection expression = ellipse(29778.204000, 33422.091600, 249.271807, 249.271807, 0.000000, X, Y)
[Sun Aug  5 15:02:45 2012] Writing source region out to fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 15:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0147580101_pi300-10000_cl_sm2.00.img.gz, (329, 370) - (357, 399)
[Sun Aug  5 15:02:45 2012] XMMSAS bgd. selection expression = annulus(29778.204000, 33422.091600, 415.453012, 830.906024, X, Y)
[Sun Aug  5 15:02:45 2012] Writing fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 15:03:49 2012] Mean detx,y = (-6387.16, 2072.96) 
[Sun Aug  5 15:03:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 15:04:00 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 15:04:00 2012] Setting source spectrum file to fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 15:04:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 15:05:29 2012] Not generating rmf since there are only 23 counts
[Sun Aug  5 15:05:29 2012] rmf not generated due to insufficient counts
[Sun Aug  5 15:06:11 2012] Updating aperture counts using extracted products
[Sun Aug  5 15:06:11 2012] Error reading totcts from fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 15:06:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 15:06:11 2012] Using photon index=1.80, rate=0.00349, arf fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 15:06:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 15:06:11 2012] Updating source flux to 7.8e-14
[Sun Aug  5 15:06:13 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Aug  5 15:06:14 2012] xmm0147580101/analysis//spectral/fullrun_mos2_xmm0147580101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete