[Fri Jun 21 05:24:44 2013] Detection parameters:
  Position = (448.0, 247.0) = 10 51 20.35 57 26 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.1 +/- 12.9
  Background counts = 22.2
  Rate = 0.0009 +/- 0.0001

[Fri Jun 21 05:24:45 2013] Off-axis axis estimate = 11.47'
[Fri Jun 21 05:25:39 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:25:39 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Jun 21 05:25:39 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.829
[Fri Jun 21 05:25:39 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 12.16"
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57.csv
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57.csv
[Fri Jun 21 05:25:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:25:43 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jun 21 05:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 21 05:25:44 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jun 21 05:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 21 05:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:26:44 2013] Spatial fit model total counts = 333.036000, observed total counts = 296.000000
[Fri Jun 21 05:26:44 2013] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 05:26:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:26:44 2013] Assessing source extent using major
[Fri Jun 21 05:26:44 2013] Source does appear to be extended
[Fri Jun 21 05:26:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 05:27:19 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:27:19 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Jun 21 05:27:19 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.829
[Fri Jun 21 05:27:19 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 12.16"
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55.csv
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55.csv
[Fri Jun 21 05:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jun 21 05:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jun 21 05:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 21 05:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:28:14 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 15.823058 pixels away
[Fri Jun 21 05:28:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:28:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:28:14 2013] Assessing source extent using major
[Fri Jun 21 05:28:14 2013] Source does appear to be extended
[Fri Jun 21 05:28:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 08:22:36 2013] XMMSAS src. selection expression = ellipse(38927.754883, 21441.256683, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 08:22:36 2013] Not overwriting source region fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src.reg
[Fri Jun 21 08:22:36 2013] Extracting stamp from image fullrun_mos2_xmm0147511801_pi300-10000_cl_sm2.00.img.gz, (411, 210) - (486, 285)
[Fri Jun 21 08:22:36 2013] XMMSAS bgd. selection expression = annulus(38927.754883, 21441.256683, 1087.500000, 2175.000000, X, Y) && !ellipse(37684.338287, 22330.359619, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 08:22:36 2013] Writing fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57.gif
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Mean detx,y = (12786.87, 5737.43) 
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src.img and ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src_b10.pi.gz and ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Setting source spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Fri Jun 21 08:22:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src.lc and ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.lc exist, delete to re-create
[Fri Jun 21 08:22:46 2013] Not generating rmf since there are only 84 counts
[Fri Jun 21 08:22:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 08:22:46 2013] fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57.arf exists, delete to re-create
[Fri Jun 21 08:25:42 2013] Updating aperture counts using extracted products
[Fri Jun 21 08:25:42 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 225.00
[Fri Jun 21 08:25:42 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_bgd.pi.gz = 762.00
[Fri Jun 21 08:25:42 2013] Got source and background scale factors 1190096.000000, 6529169.000000
[Fri Jun 21 08:25:43 2013] User source parameters:
  Position = (448.0, 247.0) = 10 51 20.35 57 26 59.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.1 +/- 16.0
  Background aperture counts = 138.9
  Rate = 0.001 +/- 0.0002

[Fri Jun 21 08:25:43 2013] Updating counts from extracted products
[Fri Jun 21 08:25:43 2013] Set source signif. to 86.11/11.79 = 7.31
[Fri Jun 21 08:25:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 08:25:48 2013] Using photon index=1.80, rate=0.000952, arf fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57.arf
[Fri Jun 21 08:25:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 08:25:48 2013] Updating source flux to 2.8e-14
[Fri Jun 21 08:26:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 08:26:15 2013] xmm0147511801/analysis//spectral/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete