[Fri Jun 21 05:24:43 2013] Detection parameters:
  Position = (305.1, 303.3) = 10 52 37.36 57 31 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 14.1
  Background counts = 32.1
  Rate = 0.0009 +/- 0.0002

[Fri Jun 21 05:24:45 2013] Off-axis axis estimate = 0.60'
[Fri Jun 21 05:25:39 2013] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:25:39 2013] Initial guess for spatial extent in simple fitting = 6.73"
[Fri Jun 21 05:25:39 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.955
[Fri Jun 21 05:25:39 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 6.73"
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56.csv
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56_1.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56.csv
[Fri Jun 21 05:25:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:25:43 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Fri Jun 21 05:25:43 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Fri Jun 21 05:25:43 2013] Fit fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Fri Jun 21 05:26:44 2013] Spatial fit model total counts = 446.001000, observed total counts = 446.000000
[Fri Jun 21 05:26:44 2013] Offset between fit and detection position for source 38 = 0.649815 pixels
[Fri Jun 21 05:26:44 2013] 430.315400 total counts/ 337.774000 bgd. counts: snr = 5.035272
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.649815 pixels
  Position = (305.4, 303.8) = 10 52 37.18 57 31 7.3
  Extent = 10.1 (5.4-13.5)", rotation angle = 0
  Source counts = 92.5 +/- 20.7
  Background counts = 337.8
  Rate = 0.001 +/- 0.0002
[Fri Jun 21 05:26:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:26:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 05:26:44 2013] Source does appear to be extended
[Fri Jun 21 05:26:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 05:27:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:27:19 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Fri Jun 21 05:27:19 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Fri Jun 21 05:27:19 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 10.10"
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54.csv
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54.csv
[Fri Jun 21 05:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Jun 21 05:27:22 2013] Fit fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Fri Jun 21 05:28:14 2013] Spatial fit model total counts = 494.100000, observed total counts = 446.000000
[Fri Jun 21 05:28:14 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 05:28:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:28:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:28:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 05:28:14 2013] Source does appear to be extended
[Fri Jun 21 05:28:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 08:22:36 2013] XMMSAS src. selection expression = ellipse(26525.455000, 26383.116020, 606.252017, 606.252017, 0.000000, X, Y)
[Fri Jun 21 08:22:36 2013] Not overwriting source region fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src.reg
[Fri Jun 21 08:22:36 2013] Extracting stamp from image fullrun_mos2_xmm0147511801_pi300-10000_cl_sm2.00.img.gz, (271, 269) - (340, 339)
[Fri Jun 21 08:22:36 2013] XMMSAS bgd. selection expression = annulus(26525.455000, 26383.116020, 1010.420029, 2020.840058, X, Y) && !ellipse(25693.334000, 27411.603800, 337.580010, 337.580010, 0.000000, X, Y) && !ellipse(28462.611980, 25286.382711, 553.852151, 171.234285, 20.205486, X, Y) && !ellipse(27952.235580, 26322.653200, 346.698127, 346.698127, 0.000000, X, Y)
[Fri Jun 21 08:22:36 2013] Writing fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38.gif
[Fri Jun 21 08:22:38 2013] ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Mean detx,y = (1860.58, -1927.59) 
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src.img and ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Setting source spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jun 21 08:22:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri Jun 21 08:22:46 2013] Not generating rmf since there are only 92 counts
[Fri Jun 21 08:22:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 08:22:46 2013] fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38.arf exists, delete to re-create
[Fri Jun 21 08:25:42 2013] Updating aperture counts using extracted products
[Fri Jun 21 08:25:42 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 291.00
[Fri Jun 21 08:25:42 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_bgd.pi.gz = 1473.00
[Fri Jun 21 08:25:42 2013] Got source and background scale factors 1159180.000000, 8779688.000000
[Fri Jun 21 08:25:42 2013] User source parameters:
  Position = (305.4, 303.8) = 10 52 37.18 57 31 7.3
  Extent = 10.1 (5.4-13.5)", rotation angle = 0
  Source aperture counts = 96.5 +/- 18.1
  Background aperture counts = 194.5
  Rate = 0.001 +/- 0.0002

[Fri Jun 21 08:25:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 08:25:48 2013] Using photon index=1.80, rate=0.00102, arf fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38.arf
[Fri Jun 21 08:25:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 08:25:48 2013] Updating source flux to 1.1e-14
[Fri Jun 21 08:26:06 2013] Flag p found in src. 38 procflags, skipping spectral fitting
[Fri Jun 21 08:26:06 2013] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 08:26:15 2013] xmm0147511801/analysis//spectral/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete