[Fri Jun 21 05:24:42 2013] Detection parameters:
  Position = (242.9, 457.7) = 10 53 11.14 57 42 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.6 +/- 12.2
  Background counts = 24.3
  Rate = 0.0008 +/- 0.0001

[Fri Jun 21 05:24:45 2013] Off-axis axis estimate = 12.23'
[Fri Jun 21 05:25:39 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:25:39 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Fri Jun 21 05:25:39 2013] source mask rpix=2.9, npix_max = 45, mask sum = 47, frac = 1.026
[Fri Jun 21 05:25:39 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 12.54"
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62.csv
[Fri Jun 21 05:25:41 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62_1.ximg exists
[Fri Jun 21 05:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62.csv
[Fri Jun 21 05:25:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:25:44 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Fri Jun 21 05:25:44 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Fri Jun 21 05:25:44 2013] Fit fullrun_mos2_xmm0147511801_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Fri Jun 21 05:26:44 2013] Spatial fit model total counts = 333.973000, observed total counts = 305.000000
[Fri Jun 21 05:26:44 2013] Offset between fit and detection position for source 16 = 0.367318 pixels
[Fri Jun 21 05:26:44 2013] 333.395100 total counts/ 291.951000 bgd. counts: snr = 2.425536
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.367318 pixels
  Position = (242.5, 457.8) = 10 53 11.34 57 42 16.8
  Extent = 3.9 (3.1-5.8)", rotation angle = 0
  Source counts = 41.4 +/- 18.3
  Background counts = 292.0
  Rate = 0.0005 +/- 0.0002
[Fri Jun 21 05:26:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:26:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 05:26:44 2013] Source does appear to be extended
[Fri Jun 21 05:26:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 05:27:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 05:27:19 2013] Initial guess for spatial extent in simple fitting = 3.88"
[Fri Jun 21 05:27:19 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.160
[Fri Jun 21 05:27:19 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 3.88"
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60.csv
[Fri Jun 21 05:27:21 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri Jun 21 05:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60.csv
[Fri Jun 21 05:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri Jun 21 05:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Jun 21 05:27:22 2013] fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Jun 21 05:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Jun 21 05:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147511801_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 05:28:14 2013] Spatial fit model total counts = 299.511000, observed total counts = 271.000000
[Fri Jun 21 05:28:14 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 05:28:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 05:28:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 05:28:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 05:28:14 2013] Source does appear to be extended
[Fri Jun 21 05:28:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 08:22:36 2013] XMMSAS src. selection expression = ellipse(21048.222614, 39777.765400, 233.055607, 233.055607, 0.000000, X, Y)
[Fri Jun 21 08:22:36 2013] Not overwriting source region fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 21 08:22:36 2013] Extracting stamp from image fullrun_mos2_xmm0147511801_pi300-10000_cl_sm2.00.img.gz, (229, 444) - (256, 471)
[Fri Jun 21 08:22:36 2013] XMMSAS bgd. selection expression = annulus(21048.222614, 39777.765400, 388.426011, 776.852022, X, Y)
[Fri Jun 21 08:22:36 2013] Writing fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16.gif
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0147511801/products/events/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Mean detx,y = (-332.76, -16235.26) 
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src.img and ../../xmm0147511801/products/images/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0147511801/products/spectra/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Jun 21 08:22:39 2013] Setting source spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 21 08:22:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 21 08:22:39 2013] ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0147511801/products/lightcurves/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Jun 21 08:22:46 2013] Not generating rmf since there are only 41 counts
[Fri Jun 21 08:22:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 08:22:46 2013] fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Fri Jun 21 08:25:43 2013] Updating aperture counts using extracted products
[Fri Jun 21 08:25:43 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 68.00
[Fri Jun 21 08:25:44 2013] Total counts from fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_bgd.pi.gz = 172.00
[Fri Jun 21 08:25:44 2013] Got source and background scale factors 167620.000000, 1176822.000000
[Fri Jun 21 08:25:44 2013] User source parameters:
  Position = (242.5, 457.8) = 10 53 11.34 57 42 16.8
  Extent = 3.9 (3.1-5.8)", rotation angle = 0
  Source aperture counts = 43.5 +/- 9.3
  Background aperture counts = 24.5
  Rate = 0.0005 +/- 0.0001

[Fri Jun 21 08:25:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 08:25:48 2013] Using photon index=1.80, rate=0.000458, arf fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16.arf
[Fri Jun 21 08:25:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 08:25:48 2013] Updating source flux to 2e-14
[Fri Jun 21 08:26:06 2013] Flag p found in src. 16 procflags, skipping spectral fitting
[Fri Jun 21 08:26:06 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 08:26:15 2013] xmm0147511801/analysis//spectral/fullrun_mos2_xmm0147511801_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete