[Thu Jan  5 11:49:14 2012] Detection parameters:
  Position = (435.3, 357.8) = 10 51 30.89 57 34 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1000.0 +/- 41.0
  Background counts = 95.5
  Rate = 0.01 +/- 0.0005

[Thu Jan  5 11:49:16 2012] Off-axis axis estimate = 10.82'
[Thu Jan  5 15:14:04 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 15:14:04 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu Jan  5 15:14:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Thu Jan  5 15:14:04 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.84"
[Thu Jan  5 17:13:35 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jan  5 17:13:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6.csv
[Thu Jan  5 17:13:35 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jan  5 17:13:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6.csv
[Thu Jan  5 17:13:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 17:13:36 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jan  5 17:13:36 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jan  5 17:13:36 2012] Fit fullrun_mos1_xmm0147510901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Jan  5 18:37:27 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.314367 pixels away
[Thu Jan  5 18:37:27 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 18:37:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 18:37:27 2012] Assessing source extent using major
[Thu Jan  5 18:37:27 2012] Source does appear to be extended
[Thu Jan  5 18:37:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 21:30:40 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 21:30:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 21:30:40 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu Jan  5 21:30:40 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Thu Jan  5 21:30:40 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.84"
[Thu Jan  5 23:15:29 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jan  5 23:15:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6.csv
[Thu Jan  5 23:15:29 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jan  5 23:15:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6.csv
[Thu Jan  5 23:15:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:15:29 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jan  5 23:15:29 2012] fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jan  5 23:15:29 2012] Fit fullrun_mos1_xmm0147510901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jan  6 00:38:42 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.771623 pixels away
[Fri Jan  6 00:38:42 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:38:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:38:42 2012] Assessing source extent using major
[Fri Jan  6 00:38:42 2012] Source does appear to be extended
[Fri Jan  6 00:38:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 04:08:21 2012] Counts = 1000.034302, rescaling region sizes by 2.000000
[Fri Jan  6 04:08:21 2012] XMMSAS src. selection expression = ellipse(37824.484009, 31079.782990, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jan  6 04:08:21 2012] Writing source region out to fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2_src.reg
[Fri Jan  6 04:08:21 2012] Extracting stamp from image fullrun_mos1_xmm0147510901_pi300-10000_cl_sm2.00.img.gz, (360, 283) - (510, 433)
[Fri Jan  6 04:08:21 2012] XMMSAS bgd. selection expression = annulus(37824.484009, 31079.782990, 4350.000000, 8700.000000, X, Y) && !ellipse(28293.956329, 36492.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.362549, 39100.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.190063, 22667.022644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41571.257400, 30235.638000, 2132.184061, 2132.184061, 0.000000, X, Y) && !ellipse(42180.144531, 26682.377441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36825.592957, 35001.269226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41504.153000, 30433.518000, 1724.456050, 1724.456050, 0.000000, X, Y)
[Fri Jan  6 04:08:21 2012] Writing fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2.gif
[Fri Jan  6 04:15:04 2012] Mean detx,y = (2682.21, -13665.72) 
[Fri Jan  6 04:15:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 04:17:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 04:17:20 2012] Setting source spectrum file to fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 04:17:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jan  6 04:54:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 04:54:33 2012] rmf not generated due to insufficient counts
[Fri Jan  6 06:47:42 2012] Updating aperture counts using extracted products
[Fri Jan  6 06:47:42 2012] Error reading totcts from fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 06:47:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 06:47:44 2012] Using photon index=1.80, rate=0.0111, arf fullrun_mos1_xmm0147510901_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 06:47:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 06:47:44 2012] Updating source flux to 2.6e-13
[Fri Jan  6 06:47:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting