[Sat Jun 15 05:13:25 2013] Detection parameters:
  Position = (271.6, 305.2) = 14 1 12.16 2 51 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.6 +/- 28.7
  Background counts = 356.0
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 2.01'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 7.43"
[Sat Jun 15 05:21:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 7.43"
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src48.ximg exists
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src48_1.ximg exists
[Sat Jun 15 07:53:22 2013] Fit fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src48 appears to have run properly
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sat Jun 15 07:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:25 2013] Source 50 is offset by 5.101396 and -4.989315 pixels which is larger than
2 X fitted extent = 0.854202 x 2.342046, not incorporating fit results
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:25 2013] Source is confused with source 49
[Sat Jun 15 09:34:48 2013] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 7.43"
[Sat Jun 15 09:34:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 7.43"
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 12:23:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 12:23:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Warning, spatial fit 48 centroid is now closest to src. 49
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:54 2013] XMMSAS src. selection expression = ellipse(23581.101440, 26502.719574, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_src.reg
[Sat Jun 15 14:04:54 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (234, 268) - (309, 343)
[Sat Jun 15 14:04:54 2013] XMMSAS bgd. selection expression = annulus(23581.101440, 26502.719574, 1087.500000, 2175.000000, X, Y) && !ellipse(26597.788800, 27854.473600, 3805.536110, 3441.264099, 106.938400, X, Y) && !ellipse(26159.339325, 29129.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.703186, 26109.889404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.714386, 27453.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.025421, 26739.080902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.281097, 25697.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.563477, 25637.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.131989, 25271.380707, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50.gif
[Sat Jun 15 15:12:25 2013] Mean detx,y = (-3017.82, 173.17) 
[Sat Jun 15 15:12:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:12:52 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:12:52 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jun 15 15:12:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Jun 15 17:30:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 17:30:38 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:44:01 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:44:01 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 1235.00
[Sat Jun 15 19:44:01 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_bgd.pi.gz = 2451.00
[Sat Jun 15 19:44:01 2013] Got source and background scale factors 1304698.000000, 4307595.000000
[Sat Jun 15 19:44:01 2013] User source parameters:
  Position = (271.6, 305.2) = 14 1 12.16 2 51 34.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 492.6 +/- 36.2
  Background aperture counts = 742.4
  Rate = 0.01 +/- 0.0008

[Sat Jun 15 19:44:01 2013] Updating counts from extracted products
[Sat Jun 15 19:44:01 2013] Set source signif. to 492.63/27.25 = 18.08
[Sat Jun 15 19:44:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:08 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50.arf
[Sat Jun 15 19:44:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:08 2013] Updating source flux to 3.4e-14
[Sat Jun 15 19:44:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete