[Sat Jun 15 05:13:25 2013] Detection parameters:
  Position = (278.5, 307.9) = 14 1 10.17 2 51 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.5 +/- 25.9
  Background counts = 361.1
  Rate = 0.004 +/- 0.0005

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 1.60'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Jun 15 05:21:51 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.749
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 7.23"
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47.csv
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47.csv
[Sat Jun 15 07:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat Jun 15 07:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:25 2013] Source 49 is offset by -6.041754 and -6.737530 pixels which is larger than
2 X fitted extent = 2.064713 x 6.648368, not incorporating fit results
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:25 2013] Source is confused with source 50
[Sat Jun 15 09:34:48 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Jun 15 09:34:48 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.749
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 7.23"
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 12:23:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 15 12:23:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Source 49 is offset by -6.150650 and -6.744748 pixels which is larger than
2 X fitted extent = 2.248409 x 6.648368, not incorporating fit results
[Sat Jun 15 14:04:32 2013] Spatial fit model total counts = 1853.030000, observed total counts = 1653.000000
[Sat Jun 15 14:04:32 2013] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:54 2013] XMMSAS src. selection expression = ellipse(24177.025421, 26739.080902, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_src.reg
[Sat Jun 15 14:04:54 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (241, 270) - (316, 345)
[Sat Jun 15 14:04:54 2013] XMMSAS bgd. selection expression = annulus(24177.025421, 26739.080902, 1087.500000, 2175.000000, X, Y) && !ellipse(26597.788800, 27854.473600, 3805.536110, 3441.264099, 106.938400, X, Y) && !ellipse(26159.339325, 29129.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.530487, 29447.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.703186, 26109.889404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.714386, 27453.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.101440, 26502.719574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.281097, 25697.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.563477, 25637.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.131989, 25271.380707, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49.gif
[Sat Jun 15 15:11:34 2013] Mean detx,y = (-2437.46, 141.17) 
[Sat Jun 15 15:11:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:11:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:11:59 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Jun 15 15:11:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Jun 15 17:30:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 17:30:15 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:44:00 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:44:00 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 1519.00
[Sat Jun 15 19:44:00 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1267.00
[Sat Jun 15 19:44:00 2013] Got source and background scale factors 1010306.000000, 2097544.000000
[Sat Jun 15 19:44:00 2013] User source parameters:
  Position = (278.5, 307.9) = 14 1 10.17 2 51 47.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 908.7 +/- 40.0
  Background aperture counts = 610.3
  Rate = 0.02 +/- 0.0009

[Sat Jun 15 19:44:00 2013] Updating counts from extracted products
[Sat Jun 15 19:44:00 2013] Set source signif. to 908.73/24.70 = 36.79
[Sat Jun 15 19:44:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:08 2013] Using photon index=1.80, rate=0.0197, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49.arf
[Sat Jun 15 19:44:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:08 2013] Updating source flux to 1e-13
[Sat Jun 15 19:44:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete