[Sat Jun 15 05:13:24 2013] Detection parameters:
  Position = (329.1, 429.6) = 14 0 55.47 3 0 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.9 +/- 25.7
  Background counts = 241.4
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 9.76'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 11.31"
[Sat Jun 15 05:21:51 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.093
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 11.31"
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src36.ximg exists
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src36_1.ximg exists
[Sat Jun 15 07:53:22 2013] Fit fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src36 appears to have run properly
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Jun 15 07:53:23 2013] Fit fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sat Jun 15 09:34:25 2013] Spatial fit model total counts = 1107.640000, observed total counts = 1111.000000
[Sat Jun 15 09:34:25 2013] Offset between fit and detection position for source 38 = 9.935245 pixels
[Sat Jun 15 09:34:25 2013] 1234.989000 total counts/ 720.614000 bgd. counts: snr = 19.161456
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 9.935245 pixels
  Position = (322.6, 422.1) = 14 0 57.36 3 0 1.3
  Extent = 22.6 (22.6-45.2)", rotation angle = 0
  Source counts = 514.4 +/- 35.1
  Background counts = 720.6
  Rate = 0.01 +/- 0.0008
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 22.62"
[Sat Jun 15 09:34:48 2013] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.016
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 22.62"
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 12:23:40 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Jun 15 12:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 12:23:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 12:23:42 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Jun 15 12:23:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 12:23:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Warning, spatial fit 36 centroid is now closest to src. 44
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:54 2013] XMMSAS src. selection expression = ellipse(28016.766000, 36671.574000, 1357.278039, 1357.278039, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_src.reg
[Sat Jun 15 14:04:54 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (245, 344) - (401, 500)
[Sat Jun 15 14:04:54 2013] XMMSAS bgd. selection expression = annulus(28016.766000, 36671.574000, 2262.130065, 4524.260130, X, Y) && !ellipse(24591.821000, 32811.033600, 387.633611, 387.633611, 0.000000, X, Y) && !ellipse(29285.507000, 37930.238000, 509.384015, 340.647210, 8.109880, X, Y) && !ellipse(31585.539520, 33361.467377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32405.433807, 41679.902496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27147.674600, 33366.008800, 635.311218, 317.568009, 26.202815, X, Y) && !ellipse(27895.056763, 31524.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27374.304626, 31524.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.616852, 31372.924774, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 14:04:54 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38.gif
[Sat Jun 15 15:02:39 2013] Mean detx,y = (4452.15, -8088.44) 
[Sat Jun 15 15:02:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:03:39 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:03:40 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jun 15 15:03:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jun 15 19:43:57 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:43:57 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 2219.00
[Sat Jun 15 19:43:57 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_bgd.pi.gz = 16435.00
[Sat Jun 15 19:43:57 2013] Got source and background scale factors 5455575.000000, 43372507.000000
[Sat Jun 15 19:43:57 2013] User source parameters:
  Position = (322.6, 422.1) = 14 0 57.36 3 0 1.3
  Extent = 22.6 (22.6-45.2)", rotation angle = 0
  Source aperture counts = 151.7 +/- 48.1
  Background aperture counts = 2067.3
  Rate = 0.003 +/- 0.001

[Sat Jun 15 19:44:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:08 2013] Using photon index=1.80, rate=0.0112, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38.arf
[Sat Jun 15 19:44:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:08 2013] Updating source flux to 4.2e-14
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete