[Sat Jun 15 05:13:22 2013] Detection parameters:
  Position = (301.2, 335.4) = 14 1 3.55 2 53 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2381.9 +/- 66.5
  Background counts = 342.3
  Rate = 0.04 +/- 0.001

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 2.69'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Jun 15 05:21:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.052
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.77"
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 07:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 07:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:25 2013] Warning, spatial fit 3 centroid is now closest to src. 7
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:48 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Jun 15 09:34:48 2013] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.052
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.77"
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 12:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 12:23:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Source 3 is offset by 7.385762 and 6.523824 pixels which is larger than
2 X fitted extent = 7.146207 x 7.146207, not incorporating fit results
[Sat Jun 15 14:04:32 2013] Spatial fit model total counts = 11958.900000, observed total counts = 7164.000000
[Sat Jun 15 14:04:32 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:53 2013] Counts = 2381.876709, rescaling region sizes by 2.000000
[Sat Jun 15 14:04:53 2013] XMMSAS src. selection expression = ellipse(26159.339325, 29129.350677, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 15 14:04:53 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 15 14:04:53 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (226, 260) - (376, 410)
[Sat Jun 15 14:04:53 2013] XMMSAS bgd. selection expression = annulus(26159.339325, 29129.350677, 4350.000000, 8700.000000, X, Y) && !ellipse(26597.788800, 27854.473600, 3805.536110, 3441.264099, 106.938400, X, Y) && !ellipse(18905.938675, 31965.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.821000, 32811.033600, 387.633611, 387.633611, 0.000000, X, Y) && !ellipse(20336.312600, 30351.070200, 411.486412, 411.486412, 0.000000, X, Y) && !ellipse(26942.530487, 29447.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.703186, 26109.889404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29253.265980, 25779.468800, 389.219211, 389.219211, 0.000000, X, Y) && !ellipse(27663.526000, 24614.472000, 1041.064030, 1041.064030, 0.000000, X, Y) && !ellipse(23571.354828, 22998.518982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22668.228360, 22610.556000, 432.540012, 309.333609, 17.088900, X, Y) && !ellipse(29285.507000, 37930.238000, 509.384015, 340.647210, 8.109880, X, Y) && !ellipse(31585.539520, 33361.467377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28481.921783, 30384.698975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18688.248840, 23334.812958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.766000, 36671.574000, 1809.704052, 1809.704052, 0.000000, X, Y) && !ellipse(35189.107239, 34485.521820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27147.674600, 33366.008800, 635.311218, 317.568009, 26.202815, X, Y) && !ellipse(27895.056763, 31524.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27374.304626, 31524.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.616852, 31372.924774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.202942, 30972.790619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.716339, 30482.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30835.918549, 28682.318085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.714386, 27453.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.025421, 26739.080902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.101440, 26502.719574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.281097, 25697.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.563477, 25637.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19512.253113, 25492.058777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.131989, 25271.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.342000, 24446.678000, 1218.592035, 1218.592035, 0.000000, X, Y) && !ellipse(27909.667389, 23878.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32266.504089, 23579.404877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28231.698400, 23170.248000, 1252.208036, 752.838422, 247.831000, X, Y) && !ellipse(28388.299000, 22413.962000, 1352.792039, 1352.792039, 0.000000, X, Y) && !ellipse(31232.662231, 21852.823395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28636.407318, 21884.493912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29029.589800, 20746.944000, 2787.376080, 1073.168031, 73.123000, X, Y) && !ellipse(29051.628000, 20940.878000, 1393.688040, 1393.688040, 0.000000, X, Y) && !ellipse(29196.216800, 20082.351800, 2145.176062, 751.339222, 64.024700, X, Y) && !ellipse(29235.746000, 19982.334000, 1515.024044, 630.149618, 65.590300, X, Y)
[Sat Jun 15 14:04:53 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3.gif
[Sat Jun 15 14:20:10 2013] Mean detx,y = (206.57, -667.45) 
[Sat Jun 15 14:20:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:23:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:23:09 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 15 14:23:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 15 15:36:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 15:36:09 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:43:46 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:43:46 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 84711.00
[Sat Jun 15 19:43:46 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 53141.00
[Sat Jun 15 19:43:46 2013] Got source and background scale factors 4392815.000000, 122568178.000000
[Sat Jun 15 19:43:46 2013] User source parameters:
  Position = (301.2, 335.4) = 14 1 3.55 2 53 38.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82806.4 +/- 292.1
  Background aperture counts = 1904.6
  Rate = 2 +/- 0.006

[Sat Jun 15 19:43:46 2013] Updating counts from extracted products
[Sat Jun 15 19:43:46 2013] Set source signif. to 82806.44/43.64 = 1897.43
[Sat Jun 15 19:44:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:06 2013] Using photon index=1.80, rate=1.8, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3.arf
[Sat Jun 15 19:44:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:06 2013] Updating source flux to 4.7e-12
[Sat Jun 15 19:44:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete