[Sat Jun 15 05:13:22 2013] Detection parameters:
  Position = (217.9, 368.0) = 14 1 27.76 2 56 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2928.8 +/- 67.4
  Background counts = 245.8
  Rate = 0.03 +/- 0.0008

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 7.72'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Sat Jun 15 05:21:51 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.762
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.29"
[Sat Jun 15 07:53:21 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 15 07:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 07:53:21 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 07:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 07:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:25 2013] Spatial fit model total counts = 2884.400000, observed total counts = 2620.000000
[Sat Jun 15 09:34:25 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:48 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Sat Jun 15 09:34:48 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.762
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.29"
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2.csv
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2.csv
[Sat Jun 15 12:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 15 12:23:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.041947 pixels away
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:53 2013] Counts = 2928.821777, rescaling region sizes by 2.000000
[Sat Jun 15 14:04:53 2013] XMMSAS src. selection expression = ellipse(18905.938675, 31965.609619, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 15 14:04:53 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 14:04:53 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (143, 293) - (293, 443)
[Sat Jun 15 14:04:53 2013] XMMSAS bgd. selection expression = annulus(18905.938675, 31965.609619, 4350.000000, 8700.000000, X, Y) && !ellipse(26597.788800, 27854.473600, 3805.536110, 3441.264099, 106.938400, X, Y) && !ellipse(26159.339325, 29129.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15365.721283, 33444.673340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.821000, 32811.033600, 387.633611, 387.633611, 0.000000, X, Y) && !ellipse(20336.312600, 30351.070200, 411.486412, 411.486412, 0.000000, X, Y) && !ellipse(26942.530487, 29447.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9732.206444, 29212.073425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13691.884613, 28851.525757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.703186, 26109.889404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12187.801224, 25344.670135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.526000, 24614.472000, 1041.064030, 1041.064030, 0.000000, X, Y) && !ellipse(23571.354828, 22998.518982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12244.480789, 22974.185638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18688.248840, 23334.812958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.766000, 36671.574000, 1809.704052, 1809.704052, 0.000000, X, Y) && !ellipse(27147.674600, 33366.008800, 635.311218, 317.568009, 26.202815, X, Y) && !ellipse(27895.056763, 31524.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27374.304626, 31524.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.616852, 31372.924774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.202942, 30972.790619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.716339, 30482.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.714386, 27453.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.025421, 26739.080902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.101440, 26502.719574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.281097, 25697.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.563477, 25637.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19512.253113, 25492.058777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.131989, 25271.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.342000, 24446.678000, 1218.592035, 1218.592035, 0.000000, X, Y) && !ellipse(27909.667389, 23878.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28231.698400, 23170.248000, 1252.208036, 752.838422, 247.831000, X, Y) && !ellipse(28388.299000, 22413.962000, 1352.792039, 1352.792039, 0.000000, X, Y) && !ellipse(29029.589800, 20746.944000, 2787.376080, 1073.168031, 73.123000, X, Y)
[Sat Jun 15 14:04:53 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 14:16:39 2013] Mean detx,y = (-5747.98, -6474.77) 
[Sat Jun 15 14:16:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:19:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:19:32 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 14:19:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 15 15:35:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 15:35:52 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:43:45 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:43:45 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3858.00
[Sat Jun 15 19:43:45 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 44116.00
[Sat Jun 15 19:43:46 2013] Got source and background scale factors 4726853.000000, 127474154.000000
[Sat Jun 15 19:43:46 2013] User source parameters:
  Position = (217.9, 368.0) = 14 1 27.76 2 56 5.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2222.1 +/- 63.1
  Background aperture counts = 1635.9
  Rate = 0.05 +/- 0.001

[Sat Jun 15 19:43:46 2013] Updating counts from extracted products
[Sat Jun 15 19:43:46 2013] Set source signif. to 2222.14/40.45 = 54.94
[Sat Jun 15 19:44:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:06 2013] Using photon index=1.80, rate=0.0482, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 15 19:44:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:06 2013] Updating source flux to 2.2e-13
[Sat Jun 15 19:44:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete