[Sat Jun 15 05:13:22 2013] Detection parameters:
  Position = (281.6, 300.7) = 14 1 9.26 2 51 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.3 +/- 25.9
  Background counts = 364.7
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 05:13:26 2013] Off-axis axis estimate = 1.23'
[Sat Jun 15 05:21:51 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:21:51 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sat Jun 15 05:21:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 11, frac = 0.612
[Sat Jun 15 05:21:51 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.04"
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 07:53:22 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 15 07:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 07:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 07:53:23 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 15 07:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 07:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:25 2013] Spatial fit model total counts = 3002.820000, observed total counts = 2259.000000
[Sat Jun 15 09:34:25 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 09:34:25 2013] Source 11 is offset by -6.856492 and -2.785386 pixels which is larger than
2 X fitted extent = 6.456552 x 6.456552, not incorporating fit results
[Sat Jun 15 09:34:25 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:25 2013] Assessing source extent using major
[Sat Jun 15 09:34:25 2013] Source does appear to be extended
[Sat Jun 15 09:34:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:34:25 2013] Source is confused with source 51
[Sat Jun 15 09:34:48 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:34:48 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sat Jun 15 09:34:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 11, frac = 0.612
[Sat Jun 15 09:34:48 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.04"
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 12:23:39 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 15 12:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 12:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 12:23:41 2013] fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 15 12:23:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 12:23:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:32 2013] Spatial fit model total counts = 2998.220000, observed total counts = 2259.000000
[Sat Jun 15 14:04:32 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 14:04:32 2013] Source 11 is offset by -6.856492 and -2.785386 pixels which is larger than
2 X fitted extent = 2.001149 x 2.001149, not incorporating fit results
[Sat Jun 15 14:04:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:32 2013] Assessing source extent using major
[Sat Jun 15 14:04:32 2013] Source does appear to be extended
[Sat Jun 15 14:04:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:04:53 2013] XMMSAS src. selection expression = ellipse(24450.703186, 26109.889404, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 14:04:53 2013] Writing source region out to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 15 14:04:53 2013] Extracting stamp from image fullrun_pn_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (244, 263) - (319, 338)
[Sat Jun 15 14:04:53 2013] XMMSAS bgd. selection expression = annulus(24450.703186, 26109.889404, 1087.500000, 2175.000000, X, Y) && !ellipse(26597.788800, 27854.473600, 3805.536110, 3441.264099, 106.938400, X, Y) && !ellipse(26159.339325, 29129.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.526000, 24614.472000, 1041.064030, 1041.064030, 0.000000, X, Y) && !ellipse(23923.714386, 27453.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.025421, 26739.080902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.101440, 26502.719574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.281097, 25697.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.563477, 25637.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.131989, 25271.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.342000, 24446.678000, 1218.592035, 1218.592035, 0.000000, X, Y)
[Sat Jun 15 14:04:53 2013] Writing fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11.gif
[Sat Jun 15 14:37:08 2013] Mean detx,y = (-2359.45, 806.11) 
[Sat Jun 15 14:37:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:37:34 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:37:34 2013] Setting source spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 15 14:37:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 15 16:50:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 16:50:07 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:43:48 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:43:48 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1531.00
[Sat Jun 15 19:43:48 2013] Total counts from fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1539.00
[Sat Jun 15 19:43:48 2013] Got source and background scale factors 997062.000000, 2330201.000000
[Sat Jun 15 19:43:48 2013] User source parameters:
  Position = (281.6, 300.7) = 14 1 9.26 2 51 20.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 872.5 +/- 40.1
  Background aperture counts = 658.5
  Rate = 0.02 +/- 0.0009

[Sat Jun 15 19:43:48 2013] Updating counts from extracted products
[Sat Jun 15 19:43:48 2013] Set source signif. to 872.48/25.66 = 34.00
[Sat Jun 15 19:44:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:06 2013] Using photon index=1.80, rate=0.0189, arf fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11.arf
[Sat Jun 15 19:44:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:07 2013] Updating source flux to 1.6e-13
[Sat Jun 15 19:44:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:45 2013] xmm0147330201/analysis//spectral/fullrun_pn_xmm0147330201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete