[Sat Jun 15 05:14:21 2013] Detection parameters:
  Position = (301.4, 350.8) = 14 1 3.52 2 54 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 19.9
  Background counts = 224.3
  Rate = 0.003 +/- 0.0004

[Sat Jun 15 05:14:22 2013] Off-axis axis estimate = 3.80'
[Sat Jun 15 08:44:35 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:44:35 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Sat Jun 15 08:44:35 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.515
[Sat Jun 15 08:44:35 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.33"
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 15 09:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 15 09:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:35 2013] Source 9 is offset by -6.297122 and -5.530309 pixels which is larger than
2 X fitted extent = 1.988110 x 0.957241, not incorporating fit results
[Sat Jun 15 09:34:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:35 2013] Assessing source extent using major
[Sat Jun 15 09:34:35 2013] Source does appear to be extended
[Sat Jun 15 09:34:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 13:26:16 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 13:26:16 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Sat Jun 15 13:26:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.515
[Sat Jun 15 13:26:16 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 8.33"
[Sat Jun 15 14:04:16 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 15 14:04:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15.csv
[Sat Jun 15 14:04:16 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 15 14:04:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15.csv
[Sat Jun 15 14:04:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 15 14:04:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 15 14:04:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 15 14:04:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:40 2013] Source 9 is offset by -7.112111 and 5.137300 pixels which is larger than
2 X fitted extent = 0.996064 x 0.996064, not incorporating fit results
[Sat Jun 15 14:04:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:41 2013] Assessing source extent using major
[Sat Jun 15 14:04:41 2013] Source does appear to be extended
[Sat Jun 15 14:04:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 18:58:28 2013] XMMSAS src. selection expression = ellipse(26170.660370, 30466.949127, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 18:58:28 2013] Writing source region out to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_src.reg
[Sat Jun 15 18:58:28 2013] Extracting stamp from image fullrun_mos2_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (264, 313) - (339, 388)
[Sat Jun 15 18:58:28 2013] XMMSAS bgd. selection expression = annulus(26170.660370, 30466.949127, 1087.500000, 2175.000000, X, Y) && !ellipse(26601.648400, 27851.828400, 3052.896088, 2874.552083, 115.143800, X, Y) && !ellipse(27331.526794, 28151.662689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.378000, 28581.450000, 2499.744072, 948.640027, 61.734110, X, Y) && !ellipse(28968.246155, 27441.652100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24393.514000, 29614.540000, 1249.872036, 1249.872036, 0.000000, X, Y)
[Sat Jun 15 18:58:28 2013] Writing fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9.gif
[Sat Jun 15 19:16:48 2013] Mean detx,y = (-427.52, 2546.58) 
[Sat Jun 15 19:16:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 19:16:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 19:16:59 2013] Setting source spectrum file to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jun 15 19:16:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jun 15 19:32:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 19:32:11 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:44:19 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:44:20 2013] Total counts from fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 666.00
[Sat Jun 15 19:44:20 2013] Total counts from fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1372.00
[Sat Jun 15 19:44:20 2013] Got source and background scale factors 1114288.000000, 4922448.000000
[Sat Jun 15 19:44:20 2013] User source parameters:
  Position = (301.4, 350.8) = 14 1 3.52 2 54 54.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 355.4 +/- 26.8
  Background aperture counts = 310.6
  Rate = 0.008 +/- 0.0006

[Sat Jun 15 19:44:20 2013] Updating counts from extracted products
[Sat Jun 15 19:44:20 2013] Set source signif. to 355.42/17.62 = 20.17
[Sat Jun 15 19:44:21 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:21 2013] Using photon index=1.80, rate=0.00793, arf fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9.arf
[Sat Jun 15 19:44:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:21 2013] Updating source flux to 1.7e-13
[Sat Jun 15 19:44:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:31 2013] xmm0147330201/analysis//spectral/fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete