[Sat Jun 15 05:14:22 2013] Detection parameters:
  Position = (310.7, 287.2) = 14 1 0.82 2 50 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 26.0
  Background counts = 214.5
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 05:14:22 2013] Off-axis axis estimate = 1.20'
[Sat Jun 15 08:44:35 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:44:35 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sat Jun 15 08:44:35 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Sat Jun 15 08:44:35 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.03"
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 09:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 09:34:10 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 15 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 09:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:35 2013] Source 21 is offset by -5.799626 and 5.676112 pixels which is larger than
2 X fitted extent = 0.808051 x 0.808051, not incorporating fit results
[Sat Jun 15 09:34:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:35 2013] Assessing source extent using major
[Sat Jun 15 09:34:35 2013] Source does appear to be extended
[Sat Jun 15 09:34:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 13:26:16 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 13:26:16 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sat Jun 15 13:26:16 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Sat Jun 15 13:26:16 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.03"
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 15 14:04:17 2013] Fit fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_src18 appears to have run properly
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 15 14:04:17 2013] fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 15 14:04:17 2013] Fit fullrun_mos2_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 15 14:04:40 2013] Source 21 is offset by 5.278420 and -7.241979 pixels which is larger than
2 X fitted extent = 6.464368 x 6.464368, not incorporating fit results
[Sat Jun 15 14:04:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:41 2013] Assessing source extent using major
[Sat Jun 15 14:04:41 2013] Source does appear to be extended
[Sat Jun 15 14:04:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 18:58:28 2013] XMMSAS src. selection expression = ellipse(26979.334503, 24939.849854, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 18:58:28 2013] Writing source region out to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_src.reg
[Sat Jun 15 18:58:28 2013] Extracting stamp from image fullrun_mos2_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (273, 250) - (348, 325)
[Sat Jun 15 18:58:28 2013] XMMSAS bgd. selection expression = annulus(26979.334503, 24939.849854, 1087.500000, 2175.000000, X, Y) && !ellipse(26601.648400, 27851.828400, 3052.896088, 2874.552083, 115.143800, X, Y) && !ellipse(25236.378000, 28581.450000, 2499.744072, 948.640027, 61.734110, X, Y) && !ellipse(28968.246155, 27441.652100, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 18:58:28 2013] Writing fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21.gif
[Sat Jun 15 19:17:37 2013] Mean detx,y = (471.67, -2814.48) 
[Sat Jun 15 19:17:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 19:17:48 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 19:17:48 2013] Setting source spectrum file to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Jun 15 19:17:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jun 15 19:41:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 19:41:06 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:44:20 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:44:20 2013] Total counts from fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 909.00
[Sat Jun 15 19:44:20 2013] Total counts from fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2051.00
[Sat Jun 15 19:44:20 2013] Got source and background scale factors 1337600.000000, 6205412.000000
[Sat Jun 15 19:44:20 2013] User source parameters:
  Position = (310.7, 287.2) = 14 1 0.82 2 50 15.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 466.9 +/- 31.2
  Background aperture counts = 442.1
  Rate = 0.01 +/- 0.0007

[Sat Jun 15 19:44:20 2013] Updating counts from extracted products
[Sat Jun 15 19:44:20 2013] Set source signif. to 466.90/21.03 = 22.21
[Sat Jun 15 19:44:21 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:21 2013] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21.arf
[Sat Jun 15 19:44:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:21 2013] Updating source flux to 1e-13
[Sat Jun 15 19:44:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:31 2013] xmm0147330201/analysis//spectral/fullrun_mos2_xmm0147330201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete