[Sat Jun 15 05:13:52 2013] Detection parameters:
  Position = (218.1, 365.7) = 14 1 27.71 2 56 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 952.1 +/- 41.3
  Background counts = 139.2
  Rate = 0.01 +/- 0.0005

[Sat Jun 15 05:13:56 2013] Off-axis axis estimate = 7.60'
[Sat Jun 15 07:53:24 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:53:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 07:53:24 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Jun 15 07:53:24 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.861
[Sat Jun 15 07:53:24 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.23"
[Sat Jun 15 08:44:34 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 08:44:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 08:44:34 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 08:44:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 08:44:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:44:34 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 08:44:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 08:44:34 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 08:44:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 08:44:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147330201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:30 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.041948 pixels away
[Sat Jun 15 09:34:30 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:30 2013] Assessing source extent using major
[Sat Jun 15 09:34:30 2013] Source does appear to be extended
[Sat Jun 15 09:34:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:23:42 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 12:23:42 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Jun 15 12:23:42 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.861
[Sat Jun 15 12:23:42 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.23"
[Sat Jun 15 13:26:15 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 13:26:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 13:26:15 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 13:26:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 13:26:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 13:26:15 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 13:26:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 13:26:15 2013] fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 13:26:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 13:26:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147330201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:04:36 2013] Spatial fit model total counts = 1092.700000, observed total counts = 769.000000
[Sat Jun 15 14:04:36 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 14:04:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:04:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:04:36 2013] Assessing source extent using major
[Sat Jun 15 14:04:36 2013] Source does appear to be extended
[Sat Jun 15 14:04:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 17:55:31 2013] XMMSAS src. selection expression = ellipse(18922.277725, 31767.671875, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 17:55:31 2013] Writing source region out to fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 17:55:31 2013] Extracting stamp from image fullrun_mos1_xmm0147330201_pi300-10000_cl_sm2.00.img.gz, (181, 328) - (256, 403)
[Sat Jun 15 17:55:31 2013] XMMSAS bgd. selection expression = annulus(18922.277725, 31767.671875, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 17:55:31 2013] Writing fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 18:05:29 2013] Mean detx,y = (6436.20, -6112.98) 
[Sat Jun 15 18:05:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 18:06:03 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 18:06:03 2013] Setting source spectrum file to fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 18:06:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 15 18:18:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 18:18:42 2013] rmf not generated due to insufficient counts
[Sat Jun 15 19:44:10 2013] Updating aperture counts using extracted products
[Sat Jun 15 19:44:10 2013] Total counts from fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 704.00
[Sat Jun 15 19:44:10 2013] Total counts from fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1455.00
[Sat Jun 15 19:44:10 2013] Got source and background scale factors 1030908.000000, 10066832.000000
[Sat Jun 15 19:44:10 2013] User source parameters:
  Position = (218.1, 365.7) = 14 1 27.71 2 56 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 555.0 +/- 27.5
  Background aperture counts = 149.0
  Rate = 0.01 +/- 0.0006

[Sat Jun 15 19:44:10 2013] Updating counts from extracted products
[Sat Jun 15 19:44:10 2013] Set source signif. to 555.00/12.21 = 45.47
[Sat Jun 15 19:44:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 19:44:15 2013] Using photon index=1.80, rate=0.0125, arf fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 15 19:44:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 19:44:15 2013] Updating source flux to 2.6e-13
[Sat Jun 15 19:44:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 19:44:28 2013] xmm0147330201/analysis//spectral/fullrun_mos1_xmm0147330201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete