[Sun May 19 16:02:04 2013] Detection parameters:
  Position = (413.9, 314.0) = 16 4 33.70 17 44 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.3 +/- 18.4
  Background counts = 125.6
  Rate = 0.005 +/- 0.0009

[Sun May 19 16:02:04 2013] Off-axis axis estimate = 8.45'
[Sun May 19 16:05:03 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sun May 19 16:05:03 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Sun May 19 16:05:03 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.604
[Sun May 19 16:05:03 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.65"
[Sun May 19 16:58:40 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 19 16:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9.csv
[Sun May 19 16:58:40 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 19 16:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9.csv
[Sun May 19 16:58:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:58:40 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 19 16:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun May 19 16:58:40 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 19 16:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun May 19 16:58:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147210101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 19:12:38 2013] Warning, spatial fit 9 centroid is now closest to src. 11
[Sun May 19 19:12:38 2013] Vigneting correction estimate = 1.000000
[Sun May 19 19:12:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 19:12:38 2013] Assessing source extent using major
[Sun May 19 19:12:38 2013] Source does appear to be extended
[Sun May 19 19:12:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 19:12:38 2013] Source is confused with source 9
[Sun May 19 19:12:55 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sun May 19 19:12:55 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Sun May 19 19:12:55 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.604
[Sun May 19 19:12:55 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.65"
[Sun May 19 20:04:01 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 19 20:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9.csv
[Sun May 19 20:04:01 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 19 20:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9.csv
[Sun May 19 20:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:04:01 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 19 20:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 20:04:02 2013] fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 19 20:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 20:04:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147210101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 22:04:00 2013] Warning, spatial fit 9 centroid is now closest to src. 3
[Sun May 19 22:04:00 2013] Vigneting correction estimate = 1.000000
[Sun May 19 22:04:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 22:04:00 2013] Assessing source extent using major
[Sun May 19 22:04:00 2013] Source does appear to be extended
[Sun May 19 22:04:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 22:04:16 2013] XMMSAS src. selection expression = ellipse(35962.780121, 27269.749573, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 22:04:16 2013] Writing source region out to fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_src.reg
[Sun May 19 22:04:16 2013] Extracting stamp from image fullrun_pn_xmm0147210101_pi300-10000_cl_sm2.00.img.gz, (376, 277) - (451, 352)
[Sun May 19 22:04:16 2013] XMMSAS bgd. selection expression = annulus(35962.780121, 27269.749573, 1087.500000, 2175.000000, X, Y) && !ellipse(35440.806671, 25807.547943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35422.463074, 26659.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34835.675049, 25678.956909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37969.668976, 28048.352844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35752.002655, 27625.905823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37977.849121, 27428.719452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35109.806824, 27093.166229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.927032, 27088.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33852.488495, 26649.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36259.511505, 26856.685425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34372.738831, 26145.342010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36360.806183, 25915.976685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36567.991394, 25458.881531, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 22:04:16 2013] Writing fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10.gif
[Sun May 19 22:08:37 2013] Mean detx,y = (8897.56, 3588.99) 
[Sun May 19 22:08:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 22:08:58 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 22:08:58 2013] Setting source spectrum file to fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 19 22:08:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 19 22:16:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 22:16:08 2013] rmf not generated due to insufficient counts
[Sun May 19 22:58:25 2013] Updating aperture counts using extracted products
[Sun May 19 22:58:25 2013] Total counts from fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 375.00
[Sun May 19 22:58:25 2013] Total counts from fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 744.00
[Sun May 19 22:58:25 2013] Got source and background scale factors 1104612.000000, 3824810.000000
[Sun May 19 22:58:25 2013] User source parameters:
  Position = (413.9, 314.0) = 16 4 33.70 17 44 18.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 160.1 +/- 20.4
  Background aperture counts = 214.9
  Rate = 0.05 +/- 0.006

[Sun May 19 22:58:25 2013] Updating counts from extracted products
[Sun May 19 22:58:25 2013] Set source signif. to 160.13/14.66 = 10.92
[Sun May 19 22:58:28 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 22:58:28 2013] Using photon index=1.80, rate=0.0494, arf fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10.arf
[Sun May 19 22:58:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 22:58:28 2013] Updating source flux to 2.3e-13
[Sun May 19 22:58:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 22:58:42 2013] xmm0147210101/analysis//spectral/fullrun_pn_xmm0147210101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete