[Tue Jun 11 02:08:58 2013] Detection parameters:
  Position = (270.9, 281.2) = 5 16 14.66 -0 9 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1158.5 +/- 67.2
  Background counts = 254.3
  Rate = 0.01 +/- 0.0008

[Tue Jun 11 02:08:59 2013] Off-axis axis estimate = 2.36'
[Tue Jun 11 03:45:52 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:45:52 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Jun 11 03:45:52 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.643
[Tue Jun 11 03:45:52 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.61"
[Tue Jun 11 08:01:46 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 11 08:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 11 08:01:46 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 11 08:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 11 08:01:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:01:47 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 11 08:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 11 08:01:47 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 11 08:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 11 08:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:01:59 2013] Source 7 is offset by -7.044544 and 1.034522 pixels which is larger than
2 X fitted extent = 2.089876 x 6.895954, not incorporating fit results
[Tue Jun 11 08:01:59 2013] Spatial fit model total counts = 32969.000000, observed total counts = 29623.000000
[Tue Jun 11 08:01:59 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 08:01:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 08:01:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 08:01:59 2013] Assessing source extent using major
[Tue Jun 11 08:01:59 2013] Source does appear to be extended
[Tue Jun 11 08:01:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 08:01:59 2013] Source is confused with source 6
[Tue Jun 11 11:27:35 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 11:27:35 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Jun 11 11:27:35 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.643
[Tue Jun 11 11:27:35 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.61"
[Tue Jun 11 14:26:50 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 11 14:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5.csv
[Tue Jun 11 14:26:50 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 11 14:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5.csv
[Tue Jun 11 14:26:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:26:51 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 11 14:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 11 14:26:51 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 11 14:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 11 14:26:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:27:00 2013] Source 7 is offset by -7.044544 and 1.042614 pixels which is larger than
2 X fitted extent = 2.110864 x 6.895954, not incorporating fit results
[Tue Jun 11 14:27:00 2013] Source 7 is offset by -7.144383 and -0.549082 pixels which is larger than
2 X fitted extent = 1.890929 x 6.995770, not incorporating fit results
[Tue Jun 11 14:27:00 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 14:27:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 14:27:00 2013] Assessing source extent using major
[Tue Jun 11 14:27:00 2013] Source does appear to be extended
[Tue Jun 11 14:27:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:35:40 2013] Counts = 1158.457153, rescaling region sizes by 2.000000
[Tue Jun 11 15:35:40 2013] XMMSAS src. selection expression = ellipse(23515.572662, 24414.905426, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 11 15:35:40 2013] Writing source region out to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_src.reg
[Tue Jun 11 15:35:40 2013] Extracting stamp from image fullrun_mos2_xmm0147190101_pi300-10000_cl_sm2.00.img.gz, (196, 206) - (346, 356)
[Tue Jun 11 15:35:40 2013] XMMSAS bgd. selection expression = annulus(23515.572662, 24414.905426, 4350.000000, 8700.000000, X, Y) && !ellipse(24535.666800, 24529.988000, 1588.308046, 1210.941635, 35.840200, X, Y) && !ellipse(24670.507751, 25066.776184, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24340.838074, 33717.315643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23582.898895, 24836.972778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32946.406647, 26941.662292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13961.966141, 19860.253113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17240.410919, 15046.922623, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 15:35:40 2013] Writing fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7.gif
[Tue Jun 11 15:50:48 2013] Mean detx,y = (82.44, 72.00) 
[Tue Jun 11 15:50:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 15:52:28 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 15:52:28 2013] Setting source spectrum file to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 11 15:52:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun 11 16:42:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 16:42:41 2013] rmf not generated due to insufficient counts
[Tue Jun 11 16:59:32 2013] Updating aperture counts using extracted products
[Tue Jun 11 16:59:32 2013] Total counts from fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 615061.00
[Tue Jun 11 16:59:32 2013] Total counts from fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 22458.00
[Tue Jun 11 16:59:32 2013] Got source and background scale factors 2114876.000000, 57141771.000000
[Tue Jun 11 16:59:32 2013] User source parameters:
  Position = (270.9, 281.2) = 5 16 14.66 -0 9 0.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 614229.8 +/- 785.3
  Background aperture counts = 831.2
  Rate = 7 +/- 0.009

[Tue Jun 11 16:59:32 2013] Updating counts from extracted products
[Tue Jun 11 16:59:32 2013] Set source signif. to 614229.81/28.83 = 21304.91
[Tue Jun 11 16:59:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 16:59:35 2013] Using photon index=1.80, rate=6.68, arf fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7.arf
[Tue Jun 11 16:59:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 16:59:35 2013] Updating source flux to 7.9e-11
[Tue Jun 11 16:59:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 16:59:38 2013] xmm0147190101/analysis//spectral/fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete