[Tue Jun 11 02:08:58 2013] Detection parameters:
  Position = (160.4, 233.5) = 5 16 46.68 -0 12 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1463.5 +/- 49.3
  Background counts = 155.8
  Rate = 0.01 +/- 0.0004

[Tue Jun 11 02:08:59 2013] Off-axis axis estimate = 11.06'
[Tue Jun 11 03:45:52 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:45:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 03:45:52 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Tue Jun 11 03:45:52 2013] source mask rpix=2.7, npix_max = 42, mask sum = 37, frac = 0.876
[Tue Jun 11 03:45:52 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.96"
[Tue Jun 11 08:01:46 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 11 08:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6.csv
[Tue Jun 11 08:01:46 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 11 08:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6.csv
[Tue Jun 11 08:01:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:01:47 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 11 08:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 11 08:01:47 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 11 08:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 11 08:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:01:59 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Tue Jun 11 08:01:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 08:01:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 08:01:59 2013] Assessing source extent using major
[Tue Jun 11 08:01:59 2013] Source does appear to be extended
[Tue Jun 11 08:01:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 08:01:59 2013] Source is confused with source 8
[Tue Jun 11 11:27:35 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 11:27:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 11:27:35 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Tue Jun 11 11:27:35 2013] source mask rpix=2.7, npix_max = 42, mask sum = 37, frac = 0.876
[Tue Jun 11 11:27:35 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.96"
[Tue Jun 11 14:26:50 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jun 11 14:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6.csv
[Tue Jun 11 14:26:50 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jun 11 14:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6.csv
[Tue Jun 11 14:26:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:26:51 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jun 11 14:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jun 11 14:26:51 2013] fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jun 11 14:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jun 11 14:26:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147190101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:27:00 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Tue Jun 11 14:27:00 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 14:27:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 14:27:00 2013] Assessing source extent using major
[Tue Jun 11 14:27:00 2013] Source does appear to be extended
[Tue Jun 11 14:27:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:35:40 2013] Counts = 1463.450806, rescaling region sizes by 2.000000
[Tue Jun 11 15:35:40 2013] XMMSAS src. selection expression = ellipse(13909.087250, 20266.687653, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 11 15:35:40 2013] Writing source region out to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 11 15:35:40 2013] Extracting stamp from image fullrun_mos2_xmm0147190101_pi300-10000_cl_sm2.00.img.gz, (85, 159) - (235, 309)
[Tue Jun 11 15:35:40 2013] XMMSAS bgd. selection expression = annulus(13909.087250, 20266.687653, 4350.000000, 8700.000000, X, Y) && !ellipse(24670.507751, 25066.776184, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22999.018127, 11470.141495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13961.966141, 19860.253113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13528.466232, 26558.801758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23094.771759, 13868.280777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17240.410919, 15046.922623, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 15:35:40 2013] Writing fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 11 15:52:39 2013] Mean detx,y = (-9367.32, 6363.81) 
[Tue Jun 11 15:52:40 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 15:53:54 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 15:53:54 2013] Setting source spectrum file to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 11 15:53:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 11 16:52:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 16:52:39 2013] rmf not generated due to insufficient counts
[Tue Jun 11 16:59:32 2013] Updating aperture counts using extracted products
[Tue Jun 11 16:59:32 2013] Total counts from fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 3388.00
[Tue Jun 11 16:59:33 2013] Total counts from fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 31072.00
[Tue Jun 11 16:59:33 2013] Got source and background scale factors 4930132.000000, 94998280.000000
[Tue Jun 11 16:59:33 2013] User source parameters:
  Position = (160.4, 233.5) = 5 16 46.68 -0 12 29.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1775.5 +/- 59.2
  Background aperture counts = 1612.5
  Rate = 0.02 +/- 0.0006

[Tue Jun 11 16:59:33 2013] Updating counts from extracted products
[Tue Jun 11 16:59:33 2013] Set source signif. to 1775.45/40.16 = 44.21
[Tue Jun 11 16:59:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 16:59:35 2013] Using photon index=1.80, rate=0.0193, arf fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 11 16:59:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 16:59:35 2013] Updating source flux to 4.1e-13
[Tue Jun 11 16:59:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 16:59:38 2013] xmm0147190101/analysis//spectral/fullrun_mos2_xmm0147190101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete