[Tue Mar 13 09:57:02 2012] Detection parameters:
  Position = (253.5, 181.1) = 2 20 49.46 -5 37 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.1 +/- 9.0
  Background counts = 3.9
  Rate = 0.008 +/- 0.001

[Tue Mar 13 09:57:02 2012] Off-axis axis estimate = 9.11'
[Tue Mar 13 09:57:42 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:57:42 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Tue Mar 13 09:57:42 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Tue Mar 13 09:57:42 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.98"
[Tue Mar 13 09:57:43 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 09:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 09:57:43 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 09:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 09:57:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:57:43 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 09:57:43 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 09:57:43 2012] Fit fullrun_mos2_xmm0147111401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 09:58:10 2012] Spatial fit model total counts = 91.995000, observed total counts = 92.000000
[Tue Mar 13 09:58:10 2012] Offset between fit and detection position for source 18 = 1.012057 pixels
[Tue Mar 13 09:58:10 2012] 90.949300 total counts/ 23.177100 bgd. counts: snr = 14.077387
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.012057 pixels
  Position = (253.8, 182.1) = 2 20 49.36 -5 37 25.7
  Extent = 11.1 (7.6-15.1)", rotation angle = 0
  Source counts = 67.8 +/- 9.5
  Background counts = 23.2
  Rate = 0.006 +/- 0.0008
[Tue Mar 13 09:58:10 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 09:58:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 09:58:10 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 09:58:10 2012] Source does appear to be extended
[Tue Mar 13 09:58:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 09:58:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:58:31 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Tue Mar 13 09:58:31 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Tue Mar 13 09:58:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.10"
[Tue Mar 13 09:58:32 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 13 09:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 09:58:32 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 13 09:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 09:58:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:58:32 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 13 09:58:32 2012] fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 13 09:58:32 2012] Fit fullrun_mos2_xmm0147111401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Mar 13 09:58:56 2012] Spatial fit model total counts = 89.936900, observed total counts = 90.000000
[Tue Mar 13 09:58:56 2012] Offset between fit and detection position for source 18 = 0.205913 pixels
[Tue Mar 13 09:58:56 2012] 88.493600 total counts/ 15.578100 bgd. counts: snr = 18.474071
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.205913 pixels
  Position = (254.0, 182.1) = 2 20 49.30 -5 37 25.6
  Extent = 11.8 (8.5-15.2)", rotation angle = 0
  Source counts = 72.9 +/- 9.4
  Background counts = 15.6
  Rate = 0.006 +/- 0.0008
[Tue Mar 13 09:58:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 09:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 09:58:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 09:58:56 2012] Source does appear to be extended
[Tue Mar 13 09:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 09:59:42 2012] XMMSAS src. selection expression = ellipse(22052.327180, 15794.682200, 707.976020, 707.976020, 0.000000, X, Y)
[Tue Mar 13 09:59:42 2012] Not overwriting source region fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar 13 09:59:42 2012] Extracting stamp from image fullrun_mos2_xmm0147111401_pi300-10000_cl_sm2.00.img.gz, (213, 141) - (295, 223)
[Tue Mar 13 09:59:42 2012] XMMSAS bgd. selection expression = annulus(22052.327180, 15794.682200, 1179.960034, 2359.920068, X, Y) && !ellipse(23861.567963, 13214.615936, 619.760518, 233.501408, 359.524963, X, Y) && !ellipse(24726.812958, 13996.444351, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 09:59:42 2012] Writing fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18.gif
[Tue Mar 13 09:59:42 2012] ../../xmm0147111401/products/events/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0147111401/products/events/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Mar 13 09:59:42 2012] Mean detx,y = (1093.06, 9223.20) 
[Tue Mar 13 09:59:42 2012] ../../xmm0147111401/products/images/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src.img and ../../xmm0147111401/products/images/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Mar 13 09:59:42 2012] ../../xmm0147111401/products/spectra/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0147111401/products/spectra/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Mar 13 09:59:42 2012] Setting source spectrum file to fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 09:59:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Mar 13 09:59:42 2012] ../../xmm0147111401/products/lightcurves/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0147111401/products/lightcurves/fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Mar 13 09:59:51 2012] Not generating rmf since there are only 72 counts
[Tue Mar 13 09:59:51 2012] rmf not generated due to insufficient counts
[Tue Mar 13 09:59:51 2012] fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Tue Mar 13 10:00:19 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:00:19 2012] Error reading totcts from fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 10:00:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:00:20 2012] Using photon index=1.80, rate=0.00629, arf fullrun_mos2_xmm0147111401_pi300-10000_pass1_cl_src18.arf
[Tue Mar 13 10:00:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:00:20 2012] Updating source flux to 1.1e-13
[Tue Mar 13 10:00:27 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting