Detector | Exposure (Original/High-E Flare Cleaned/Low-E Cleaned) | Image binning | Plate scale ("/pixel) | Bgd. level (orig/High-E flare cleaned/cleaned, counts/sq. arcmin/s) | GTI file | Bgd. light curves | Roll angle | CCD counts | Extra info |
---|---|---|---|---|---|---|---|---|---|
mos1 | 5164 | 5164 | 4971 | 1.00 | 4.35 | 0/0 | Yes | orig clean | ccd1:4034 ccd2:2220 ccd3:2713 ccd4:2230 ccd5:2301 ccd6:2583 ccd7:2144 |
filter=Thin1 date-obs=2004-03-13T12:03:06 object=SAX J0635+0521 roll_angle=276.721710205 |
|
mos2 | 5169 | 5169 | 4977 | 1.00 | 4.35 | 0/0 | Yes | orig clean | ccd1:4248 ccd2:2398 ccd3:2638 ccd4:2130 ccd5:2372 ccd6:2974 ccd7:2538 |
filter=Thin1 date-obs=2004-03-13T12:03:07 object=SAX J0635+0521 roll_angle=276.721710205 |
10 source(s) in memory Iteration: 2 Images: |mos1 |mos2 |
|
|
Python version = 2.5.4 (r254:67916, Aug 14 2009, 18:07:15) [GCC 4.1.1 20070105 (Red Hat 4.1.1-52)]
Headas version = 6.11
XAssist version = 1.000
SAS version = xmmsas_20110223_1801-11.0.0
numpy version = 1.3.0
Pyfits version = 2.1.1
XAssist originally started on this data set at Thu May 31 18:09:05 2012
This data set was last accessed on Thu May 31 18:09:05 2012
Current user = xassist on x3.localdomain
Number of fields in memory = 1
Current field being processed = xmm0146871301
Position of field target = 6 35 18.00 5 33 11.0
Current telescope = xmm
Current detector = all
Processing mode = proc
Processing status = OK
Detection method = eboxdetect
Batch processing enabled
Place data, logs, etc. in field subdirectories
Image analysis will be over range of allowed energies
Will analyze each ccd separately
Log files: processing messages |error messages |all messages (very detailed) |source logs