[Tue May 29 19:39:58 2012] Detection parameters:
  Position = (296.7, 285.1) = 2 49 40.20 -31 13 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 19.3
  Background counts = 118.5
  Rate = 0.003 +/- 0.0006

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 0.98'
[Tue May 29 19:43:15 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Tue May 29 19:43:15 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 6.92"
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62.csv
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62_1.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62.csv
[Tue May 29 21:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:25 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Tue May 29 21:52:25 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Tue May 29 21:52:25 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Wed May 30 00:48:32 2012] Source 66 is offset by 7.025553 and -1.625501 pixels which is larger than
2 X fitted extent = 2.049885 x 2.049885, not incorporating fit results
[Wed May 30 00:48:32 2012] Source 66 is offset by 5.183967 and -1.463177 pixels which is larger than
2 X fitted extent = 3.034561 x 3.034561, not incorporating fit results
[Wed May 30 00:48:32 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:32 2012] Assessing source extent using major
[Wed May 30 00:48:32 2012] Source does appear to be extended
[Wed May 30 00:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:32 2012] Source is confused with source 68
[Wed May 30 00:48:32 2012] Source is confused with source 72
[Wed May 30 00:49:05 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Wed May 30 00:49:05 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Wed May 30 00:49:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Wed May 30 00:49:05 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 6.92"
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54.csv
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54_1.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54.csv
[Wed May 30 02:48:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Wed May 30 02:48:42 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Wed May 30 05:15:44 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 15.241901 pixels away
[Wed May 30 05:15:44 2012] Warning, spatial fit 54 centroid is now closest to src. 19
[Wed May 30 05:15:45 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:45 2012] Assessing source extent using major
[Wed May 30 05:15:45 2012] Source does appear to be extended
[Wed May 30 05:15:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:16:09 2012] XMMSAS src. selection expression = ellipse(25761.353088, 24753.129608, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing source region out to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66_src.reg
[Wed May 30 05:16:09 2012] Extracting stamp from image fullrun_pn_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (259, 248) - (334, 323)
[Wed May 30 05:16:09 2012] XMMSAS bgd. selection expression = annulus(25761.353088, 24753.129608, 1087.500000, 2175.000000, X, Y) && !ellipse(22874.717621, 24066.270874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27385.079800, 27242.203600, 1029.592030, 867.808025, 111.970900, X, Y) && !ellipse(28394.462000, 26584.114000, 1235.320036, 1235.320036, 0.000000, X, Y) && !ellipse(28877.048000, 25922.246000, 1254.392036, 1254.392036, 0.000000, X, Y) && !ellipse(25094.554000, 25172.516000, 652.121619, 652.121619, 0.000000, X, Y) && !ellipse(22864.795776, 23771.512177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.862200, 23917.784200, 397.742411, 397.742411, 0.000000, X, Y) && !ellipse(25366.986800, 26170.274000, 412.843212, 412.843212, 0.000000, X, Y) && !ellipse(25588.279694, 27355.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.965363, 26738.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.303925, 25606.352478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.574000, 25309.956000, 1152.216033, 1152.216033, 0.000000, X, Y) && !ellipse(26114.368439, 24753.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.287460, 24180.784000, 1131.432033, 895.584026, 32.808000, X, Y) && !ellipse(28022.142395, 24133.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.954315, 24329.509064, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66.gif
[Wed May 30 05:47:12 2012] Mean detx,y = (-1026.67, 2619.58) 
[Wed May 30 05:47:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:47:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:47:28 2012] Setting source spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed May 30 05:47:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Wed May 30 06:38:57 2012] Not generating rmf since there are only 79 counts
[Wed May 30 06:38:57 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:37 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:37 2012] Error reading totcts from fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed May 30 08:33:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:38 2012] Using photon index=1.80, rate=0.00263, arf fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src66.arf
[Wed May 30 08:33:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:38 2012] Updating source flux to 7.3e-15
[Wed May 30 08:35:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting