[Tue May 29 19:39:58 2012] Detection parameters:
  Position = (294.7, 315.0) = 2 49 40.87 -31 11 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.7 +/- 25.0
  Background counts = 133.0
  Rate = 0.007 +/- 0.0008

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 1.23'
[Tue May 29 19:43:15 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue May 29 19:43:15 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.04"
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54.csv
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54.csv
[Tue May 29 21:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:25 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue May 29 21:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Tue May 29 21:52:25 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue May 29 21:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Tue May 29 21:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:32 2012] Warning, spatial fit 54 centroid is now closest to src. 61
[Wed May 30 00:48:32 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:32 2012] Assessing source extent using major
[Wed May 30 00:48:32 2012] Source does appear to be extended
[Wed May 30 00:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:49:05 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed May 30 00:49:05 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Wed May 30 00:49:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Wed May 30 00:49:05 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 7.04"
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48.csv
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48.csv
[Wed May 30 02:48:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed May 30 02:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed May 30 02:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed May 30 02:48:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:44 2012] Source 58 is offset by 4.854364 and -1.944846 pixels which is larger than
2 X fitted extent = 0.809660 x 0.809660, not incorporating fit results
[Wed May 30 05:15:44 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 20.259580 pixels away
[Wed May 30 05:15:45 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:45 2012] Assessing source extent using major
[Wed May 30 05:15:45 2012] Source does appear to be extended
[Wed May 30 05:15:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:16:09 2012] XMMSAS src. selection expression = ellipse(25588.279694, 27355.961029, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing source region out to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58_src.reg
[Wed May 30 05:16:09 2012] Extracting stamp from image fullrun_pn_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (257, 277) - (332, 352)
[Wed May 30 05:16:09 2012] XMMSAS bgd. selection expression = annulus(25588.279694, 27355.961029, 1087.500000, 2175.000000, X, Y) && !ellipse(27385.079800, 27242.203600, 1029.592030, 867.808025, 111.970900, X, Y) && !ellipse(27547.532013, 28669.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.462000, 26584.114000, 1235.320036, 1235.320036, 0.000000, X, Y) && !ellipse(28877.048000, 25922.246000, 1254.392036, 1254.392036, 0.000000, X, Y) && !ellipse(25094.554000, 25172.516000, 652.121619, 652.121619, 0.000000, X, Y) && !ellipse(26824.047150, 28740.712799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.986800, 26170.274000, 412.843212, 412.843212, 0.000000, X, Y) && !ellipse(27833.332642, 29091.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.652313, 28827.346405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.485718, 29849.405243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.505432, 29763.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.642883, 28988.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.965363, 26738.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.303925, 25606.352478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22621.204803, 25371.034576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25761.353088, 24753.129608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.574000, 25309.956000, 1152.216033, 1152.216033, 0.000000, X, Y) && !ellipse(26114.368439, 24753.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.287460, 24180.784000, 1131.432033, 895.584026, 32.808000, X, Y) && !ellipse(25911.954315, 24329.509064, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58.gif
[Wed May 30 05:44:18 2012] Mean detx,y = (-1531.95, 140.33) 
[Wed May 30 05:44:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:44:33 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:44:34 2012] Setting source spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed May 30 05:44:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Wed May 30 06:38:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 06:38:01 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:37 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:37 2012] Error reading totcts from fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed May 30 08:33:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:38 2012] Using photon index=1.80, rate=0.0068, arf fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src58.arf
[Wed May 30 08:33:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:38 2012] Updating source flux to 2e-14
[Wed May 30 08:35:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting