[Tue May 29 19:39:58 2012] Detection parameters:
  Position = (308.9, 330.9) = 2 49 36.06 -31 10 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 262.4 +/- 24.4
  Background counts = 134.1
  Rate = 0.01 +/- 0.0009

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 2.47'
[Tue May 29 19:43:15 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue May 29 19:43:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.67"
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23.csv
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23.csv
[Tue May 29 21:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 29 21:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:32 2012] Source 26 is offset by 0.966901 and 3.278630 pixels which is larger than
2 X fitted extent = 2.121186 x 2.121186, not incorporating fit results
[Wed May 30 00:48:32 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:32 2012] Assessing source extent using major
[Wed May 30 00:48:32 2012] Source does appear to be extended
[Wed May 30 00:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:49:05 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Wed May 30 00:49:05 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Wed May 30 00:49:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Wed May 30 00:49:05 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.67"
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22.csv
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22.csv
[Wed May 30 02:48:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May 30 02:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May 30 02:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 30 02:48:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:44 2012] Source 26 is offset by -0.982171 and 4.421687 pixels which is larger than
2 X fitted extent = 1.725903 x 1.725903, not incorporating fit results
[Wed May 30 05:15:44 2012] Warning, spatial fit 22 centroid is now closest to src. 54
[Wed May 30 05:15:44 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:44 2012] Assessing source extent using major
[Wed May 30 05:15:44 2012] Source does appear to be extended
[Wed May 30 05:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:16:09 2012] XMMSAS src. selection expression = ellipse(26824.047150, 28740.712799, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing source region out to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26_src.reg
[Wed May 30 05:16:09 2012] Extracting stamp from image fullrun_pn_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (271, 293) - (346, 368)
[Wed May 30 05:16:09 2012] XMMSAS bgd. selection expression = annulus(26824.047150, 28740.712799, 1087.500000, 2175.000000, X, Y) && !ellipse(27385.079800, 27242.203600, 1029.592030, 867.808025, 111.970900, X, Y) && !ellipse(27547.532013, 28669.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.462000, 26584.114000, 1235.320036, 1235.320036, 0.000000, X, Y) && !ellipse(28877.048000, 25922.246000, 1254.392036, 1254.392036, 0.000000, X, Y) && !ellipse(25366.986800, 26170.274000, 412.843212, 412.843212, 0.000000, X, Y) && !ellipse(27833.332642, 29091.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.652313, 28827.346405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.485718, 29849.405243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.505432, 29763.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.642883, 28988.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29379.281860, 28738.039185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29289.995880, 28279.868744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25588.279694, 27355.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.965363, 26738.268463, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26.gif
[Wed May 30 05:31:29 2012] Mean detx,y = (-668.06, -1511.12) 
[Wed May 30 05:31:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:31:45 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:31:46 2012] Setting source spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed May 30 05:31:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 30 06:27:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 06:27:49 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:37 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:37 2012] Error reading totcts from fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed May 30 08:33:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:37 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src26.arf
[Wed May 30 08:33:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:37 2012] Updating source flux to 3.2e-14
[Wed May 30 08:35:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting