[Tue May 29 19:39:57 2012] Detection parameters:
  Position = (334.0, 301.1) = 2 49 27.55 -31 12 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 440.5 +/- 33.6
  Background counts = 143.0
  Rate = 0.01 +/- 0.001

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 2.58'
[Tue May 29 19:43:15 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue May 29 19:43:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.72"
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15.csv
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15.csv
[Tue May 29 21:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 29 21:52:24 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May 30 00:48:32 2012] Warning, spatial fit 15 centroid is now closest to src. 16
[Wed May 30 00:48:32 2012] Spatial fit model total counts = 2366.340000, observed total counts = 2367.000000
[Wed May 30 00:48:32 2012] Offset between fit and detection position for source 17 = 4.789920 pixels
[Wed May 30 00:48:32 2012] Warning, changing simple spatial fit ID from 15 to 61
[Wed May 30 00:48:32 2012] 2353.776000 total counts/ 2100.060000 bgd. counts: snr = 5.536458
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.789920 pixels
  Position = (330.7, 297.6) = 2 49 28.66 -31 12 28.8
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 253.7 +/- 48.5
  Background counts = 2100.1
  Rate = 0.007 +/- 0.001
[Wed May 30 00:48:32 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:32 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:32 2012] Source does appear to be extended
[Wed May 30 00:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:32 2012] Source is confused with source 16
[Wed May 30 00:49:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 00:49:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 00:49:05 2012] Initial guess for spatial extent in simple fitting = 15.72"
[Wed May 30 00:49:05 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.945
[Wed May 30 00:49:05 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 15.72"
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14.csv
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14.csv
[Wed May 30 02:48:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 30 02:48:42 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May 30 05:15:44 2012] Warning, spatial fit 14 centroid is now closest to src. 10
[Wed May 30 05:15:44 2012] Spatial fit model total counts = 2362.900000, observed total counts = 2367.000000
[Wed May 30 05:15:44 2012] Offset between fit and detection position for source 17 = 1.998609 pixels
[Wed May 30 05:15:44 2012] Warning, changing simple spatial fit ID from 14 to 53
[Wed May 30 05:15:44 2012] 2273.161000 total counts/ 1983.000000 bgd. counts: snr = 6.515949
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.998609 pixels
  Position = (332.5, 298.5) = 2 49 28.06 -31 12 24.9
  Extent = 15.7 (15.6-15.7)", rotation angle = 0
  Source counts = 290.2 +/- 47.7
  Background counts = 1983.0
  Rate = 0.008 +/- 0.001
[Wed May 30 05:15:44 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:44 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:44 2012] Source does appear to be extended
[Wed May 30 05:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:16:08 2012] XMMSAS src. selection expression = ellipse(28877.048000, 25922.246000, 940.794027, 940.794027, 0.000000, X, Y)
[Wed May 30 05:16:08 2012] Writing source region out to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17_src.reg
[Wed May 30 05:16:08 2012] Extracting stamp from image fullrun_pn_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (278, 244) - (387, 353)
[Wed May 30 05:16:09 2012] XMMSAS bgd. selection expression = annulus(28877.048000, 25922.246000, 1567.990045, 3135.980090, X, Y) && !ellipse(27385.079800, 27242.203600, 1029.592030, 867.808025, 111.970900, X, Y) && !ellipse(27547.532013, 28669.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.462000, 26584.114000, 1235.320036, 1235.320036, 0.000000, X, Y) && !ellipse(25094.554000, 25172.516000, 652.121619, 652.121619, 0.000000, X, Y) && !ellipse(26983.862200, 23917.784200, 397.742411, 397.742411, 0.000000, X, Y) && !ellipse(26824.047150, 28740.712799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.986800, 26170.274000, 412.843212, 412.843212, 0.000000, X, Y) && !ellipse(27833.332642, 29091.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.652313, 28827.346405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.008400, 26623.134400, 398.132011, 398.132011, 0.000000, X, Y) && !ellipse(27209.485718, 29849.405243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.505432, 29763.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.642883, 28988.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29379.281860, 28738.039185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29289.995880, 28279.868744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25588.279694, 27355.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.965363, 26738.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.303925, 25606.352478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.817383, 25378.458038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25761.353088, 24753.129608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.574000, 25309.956000, 1152.216033, 1152.216033, 0.000000, X, Y) && !ellipse(26114.368439, 24753.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32064.759033, 24646.312469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.287460, 24180.784000, 1131.432033, 895.584026, 32.808000, X, Y) && !ellipse(28022.142395, 24133.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.954315, 24329.509064, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 05:16:09 2012] Writing fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17.gif
[Wed May 30 05:27:34 2012] Mean detx,y = (1705.17, 819.72) 
[Wed May 30 05:27:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:27:56 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:27:56 2012] Setting source spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 30 05:27:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May 30 08:33:36 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:37 2012] Error reading totcts from fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 30 08:33:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:37 2012] Using photon index=1.80, rate=0.00841, arf fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src17.arf
[Wed May 30 08:33:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:37 2012] Updating source flux to 1.9e-14
[Wed May 30 08:35:19 2012] Flag c found in src. 17 procflags, skipping spectral fitting