[Tue May 29 19:39:57 2012] Detection parameters:
  Position = (324.0, 304.1) = 2 49 30.93 -31 12 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 938.9 +/- 45.3
  Background counts = 148.5
  Rate = 0.03 +/- 0.001

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 1.90'
[Tue May 29 19:43:15 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Tue May 29 19:43:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.38"
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14.csv
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14.csv
[Tue May 29 21:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue May 29 21:52:24 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed May 30 00:48:32 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.253931 pixels away
[Wed May 30 00:48:32 2012] Spatial fit model total counts = 3764.130000, observed total counts = 3766.000000
[Wed May 30 00:48:32 2012] Offset between fit and detection position for source 16 = 3.555373 pixels
[Wed May 30 00:48:32 2012] Warning, changing simple spatial fit ID from 14 to 15
[Wed May 30 00:48:32 2012] 3710.918000 total counts/ 3510.880000 bgd. counts: snr = 3.376016
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.555373 pixels
  Position = (326.9, 306.1) = 2 49 29.94 -31 11 51.8
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 200.0 +/- 60.9
  Background counts = 3510.9
  Rate = 0.006 +/- 0.002
[Wed May 30 00:48:32 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:32 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:32 2012] Source does appear to be extended
[Wed May 30 00:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:32 2012] Source is confused with source 17
[Wed May 30 00:49:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 00:49:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 00:49:05 2012] Initial guess for spatial extent in simple fitting = 15.44"
[Wed May 30 00:49:05 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.976
[Wed May 30 00:49:05 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 15.44"
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13.csv
[Wed May 30 02:48:41 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 30 02:48:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13.csv
[Wed May 30 02:48:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 30 02:48:42 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 30 02:48:42 2012] Fit fullrun_pn_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May 30 05:15:44 2012] Source 16 is offset by 1.026000 and 3.026598 pixels which is larger than
2 X fitted extent = 1.363076 x 1.363076, not incorporating fit results
[Wed May 30 05:15:44 2012] Warning, spatial fit 13 centroid is now closest to src. 10
[Wed May 30 05:15:44 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:44 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:44 2012] Source does appear to be extended
[Wed May 30 05:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:16:08 2012] XMMSAS src. selection expression = ellipse(28394.462000, 26584.114000, 926.490027, 926.490027, 0.000000, X, Y)
[Wed May 30 05:16:08 2012] Writing source region out to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16_src.reg
[Wed May 30 05:16:08 2012] Extracting stamp from image fullrun_pn_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (274, 253) - (380, 359)
[Wed May 30 05:16:08 2012] XMMSAS bgd. selection expression = annulus(28394.462000, 26584.114000, 1544.150044, 3088.300089, X, Y) && !ellipse(27385.079800, 27242.203600, 1029.592030, 867.808025, 111.970900, X, Y) && !ellipse(27547.532013, 28669.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28877.048000, 25922.246000, 1254.392036, 1254.392036, 0.000000, X, Y) && !ellipse(25094.554000, 25172.516000, 652.121619, 652.121619, 0.000000, X, Y) && !ellipse(26983.862200, 23917.784200, 397.742411, 397.742411, 0.000000, X, Y) && !ellipse(26824.047150, 28740.712799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.986800, 26170.274000, 412.843212, 412.843212, 0.000000, X, Y) && !ellipse(27833.332642, 29091.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.652313, 28827.346405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.008400, 26623.134400, 398.132011, 398.132011, 0.000000, X, Y) && !ellipse(31986.998535, 30366.591675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.485718, 29849.405243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.505432, 29763.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.642883, 28988.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29379.281860, 28738.039185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29289.995880, 28279.868744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25588.279694, 27355.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.965363, 26738.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.303925, 25606.352478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.817383, 25378.458038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25761.353088, 24753.129608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.574000, 25309.956000, 1152.216033, 1152.216033, 0.000000, X, Y) && !ellipse(26114.368439, 24753.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32064.759033, 24646.312469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.287460, 24180.784000, 1131.432033, 895.584026, 32.808000, X, Y) && !ellipse(28022.142395, 24133.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.954315, 24329.509064, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 05:16:08 2012] Writing fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16.gif
[Wed May 30 05:27:00 2012] Mean detx,y = (1051.99, 272.69) 
[Wed May 30 05:27:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:27:20 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:27:20 2012] Setting source spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 30 05:27:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 30 08:33:36 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:36 2012] Error reading totcts from fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 30 08:33:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:37 2012] Using photon index=1.80, rate=0.0058, arf fullrun_pn_xmm0146510401_pi300-10000_pass1_cl_src16.arf
[Wed May 30 08:33:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:37 2012] Updating source flux to 1.3e-14
[Wed May 30 08:35:19 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Wed May 30 08:35:19 2012] Flag c found in src. 16 procflags, skipping spectral fitting