[Tue May 29 19:39:57 2012] Detection parameters:
  Position = (330.0, 326.9) = 2 49 28.90 -31 10 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.4 +/- 25.6
  Background counts = 136.2
  Rate = 0.01 +/- 0.0009

[Tue May 29 19:39:59 2012] Off-axis axis estimate = 3.08'
[Tue May 29 19:43:15 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:43:15 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue May 29 19:43:15 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.690
[Tue May 29 19:43:15 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.97"
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10.csv
[Tue May 29 21:52:23 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 29 21:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10.csv
[Tue May 29 21:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 29 21:52:24 2012] fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 29 21:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 29 21:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:32 2012] Source 12 is offset by -0.398711 and 4.403119 pixels which is larger than
2 X fitted extent = 3.689048 x 3.689048, not incorporating fit results
[Wed May 30 00:48:32 2012] Spatial fit model total counts = 2007.650000, observed total counts = 2004.000000
[Wed May 30 00:48:32 2012] Offset between fit and detection position for source 12 = 2.536331 pixels
[Wed May 30 00:48:32 2012] Warning, changing simple spatial fit ID from 10 to 52
[Wed May 30 00:48:32 2012] 1939.501700 total counts/ 1883.840000 bgd. counts: snr = 1.282432
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.536331 pixels
  Position = (330.4, 324.4) = 2 49 28.77 -31 10 32.4
  Extent = 9.2 (2.7-16.6)", rotation angle = 0
  Source counts = 55.7 +/- 44.0
  Background counts = 1883.8
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability