[Tue May 29 19:40:59 2012] Detection parameters:
  Position = (325.2, 310.8) = 2 49 30.54 -31 11 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 354.0 +/- 27.2
  Background counts = 51.3
  Rate = 0.01 +/- 0.0008

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 2.14'
[Tue May 29 23:16:57 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Tue May 29 23:16:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.607
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.50"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 30 00:48:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 30 00:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 30 00:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 30 00:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:52 2012] Warning, spatial fit 7 centroid is now closest to src. 24
[Wed May 30 00:48:52 2012] Source 9 is offset by 6.021558 and -2.011975 pixels which is larger than
2 X fitted extent = 5.584644 x 5.584644, not incorporating fit results
[Wed May 30 00:48:52 2012] Source 9 is offset by 8.907328 and 2.102255 pixels which is larger than
2 X fitted extent = 6.732460 x 6.732460, not incorporating fit results
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:52 2012] Source is confused with source 10
[Wed May 30 00:48:52 2012] Source is confused with source 31
[Wed May 30 03:48:24 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed May 30 03:48:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.607
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.50"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:55 2012] Warning, spatial fit 7 centroid is now closest to src. 40
[Wed May 30 05:15:55 2012] Source 9 is offset by 8.907328 and 2.102255 pixels which is larger than
2 X fitted extent = 6.723908 x 6.723908, not incorporating fit results
[Wed May 30 05:15:55 2012] Spatial fit model total counts = 3281.380000, observed total counts = 2872.000000
[Wed May 30 05:15:55 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 05:15:55 2012] Spatial fit model total counts = 2991.690000, observed total counts = 2716.000000
[Wed May 30 05:15:55 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:59 2012] XMMSAS src. selection expression = ellipse(28241.211517, 26994.622162, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9_src.reg
[Wed May 30 07:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (288, 273) - (363, 348)
[Wed May 30 07:52:59 2012] XMMSAS bgd. selection expression = annulus(28241.211517, 26994.622162, 1087.500000, 2175.000000, X, Y) && !ellipse(27396.429800, 27229.205600, 938.304027, 938.304027, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.664000, 26499.336000, 1192.328034, 1192.328034, 0.000000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.952000, 28306.274000, 1221.224035, 1221.224035, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(28839.660000, 27277.126000, 1209.960035, 1209.960035, 0.000000, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9.gif
[Wed May 30 07:57:20 2012] Mean detx,y = (-756.09, -105.64) 
[Wed May 30 07:57:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:57:26 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:57:26 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 30 07:57:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 30 08:11:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 08:11:27 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00998, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src9.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 9.7e-14
[Wed May 30 08:34:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting