[Tue May 29 19:40:59 2012] Detection parameters:
  Position = (315.4, 313.1) = 2 49 33.84 -31 11 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2932.9 +/- 66.2
  Background counts = 52.6
  Rate = 0.08 +/- 0.002

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 1.63'
[Tue May 29 23:16:57 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue May 29 23:16:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 00:48:52 2012] Spatial fit model total counts = 6415.560000, observed total counts = 6096.000000
[Wed May 30 00:48:52 2012] Offset between fit and detection position for source 5 = 0.442787 pixels
[Wed May 30 00:48:52 2012] 6358.940000 total counts/ 3344.560000 bgd. counts: snr = 52.122892
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.442787 pixels
  Position = (315.5, 313.5) = 2 49 33.83 -31 11 19.6
  Extent = 11.7 (10.9-12.5)", rotation angle = 0
  Source counts = 3014.4 +/- 79.7
  Background counts = 3344.6
  Rate = 0.08 +/- 0.002
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:48:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Wed May 30 03:48:24 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.199
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.73"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:55 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:58 2012] Counts = 3014.380000, rescaling region sizes by 2.000000
[Wed May 30 07:52:58 2012] XMMSAS src. selection expression = ellipse(27396.429800, 27229.205600, 1407.456040, 1407.456040, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_src.reg
[Wed May 30 07:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (235, 233) - (396, 394)
[Wed May 30 07:52:58 2012] XMMSAS bgd. selection expression = annulus(27396.429800, 27229.205600, 4691.520135, 9383.040270, X, Y) && !ellipse(26868.909180, 20820.228073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22709.165200, 23971.979000, 404.504012, 404.504012, 0.000000, X, Y) && !ellipse(36955.054840, 21189.452377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.900665, 35824.758423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.211517, 26994.622162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19500.490600, 32817.811740, 455.898413, 455.898413, 0.000000, X, Y) && !ellipse(33935.606842, 19964.582489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35042.471000, 28394.750000, 508.686415, 508.686415, 0.000000, X, Y) && !ellipse(37347.797394, 34514.018250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.551600, 24914.787400, 497.784014, 497.784014, 0.000000, X, Y) && !ellipse(28822.664000, 26499.336000, 1192.328034, 1192.328034, 0.000000, X, Y) && !ellipse(26941.005960, 23890.969800, 463.037613, 234.630407, 60.777000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(35445.038000, 28690.416000, 1707.224049, 505.960815, 328.620000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.952000, 28306.274000, 1221.224035, 1221.224035, 0.000000, X, Y) && !ellipse(17820.663589, 35257.397247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18278.887800, 26473.366000, 762.058422, 373.717611, 104.335606, X, Y) && !ellipse(22657.466740, 25353.648000, 445.961613, 445.961613, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(32052.200300, 24687.607200, 558.410969, 558.410969, 0.000000, X, Y) && !ellipse(34260.316925, 30074.918121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(28839.660000, 27277.126000, 1209.960035, 1209.960035, 0.000000, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5.gif
[Wed May 30 07:53:03 2012] Mean detx,y = (17.39, -129.49) 
[Wed May 30 07:53:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:55:14 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:55:15 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 07:55:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.0799, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 7.2e-13
[Wed May 30 08:35:19 2012] Reading fit data from xmm0146510401/analysis//spectral/fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_pl.csv
[Wed May 30 08:35:19 2012] Spectral fit parameter nH value = 5.17776e+21
[Wed May 30 08:35:19 2012] Spectral fit parameter PhoIndex value = 4.68848
[Wed May 30 08:35:19 2012] Failed to get F(0.3-8.0) from xmm0146510401/analysis//spectral/fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed May 30 08:35:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:35:19 2012] Using Nh = 5.2e+21, photon index=4.69, rate=0.0799, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src5.arf
[Wed May 30 08:35:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:35:19 2012] Updating source flux to 4.6e-13