[Tue May 29 19:41:00 2012] Detection parameters:
  Position = (289.5, 287.0) = 2 49 42.64 -31 13 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.3 +/- 19.3
  Background counts = 43.9
  Rate = 0.005 +/- 0.0005

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 1.06'
[Tue May 29 23:16:57 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Tue May 29 23:16:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.135
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 6.96"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed May 30 00:48:52 2012] Source 49 is offset by 5.995253 and -6.588648 pixels which is larger than
2 X fitted extent = 0.799632 x 0.799632, not incorporating fit results
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:48:24 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Wed May 30 03:48:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.135
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 6.96"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May 30 05:15:55 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 32.550489 pixels away
[Wed May 30 05:15:55 2012] Spatial fit model total counts = 694.999000, observed total counts = 695.000000
[Wed May 30 05:15:55 2012] Offset between fit and detection position for source 49 = 0.055063 pixels
[Wed May 30 05:15:55 2012] 706.122000 total counts/ 600.489000 bgd. counts: snr = 4.310693
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.055063 pixels
  Position = (289.4, 286.9) = 2 49 42.66 -31 13 15.3
  Extent = 6.2 (4.9-8.4)", rotation angle = 0
  Source counts = 105.6 +/- 26.6
  Background counts = 600.5
  Rate = 0.003 +/- 0.0007
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:59 2012] XMMSAS src. selection expression = ellipse(25130.551600, 24914.787400, 373.338011, 373.338011, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49_src.reg
[Wed May 30 07:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (268, 265) - (311, 308)
[Wed May 30 07:52:59 2012] XMMSAS bgd. selection expression = annulus(25130.551600, 24914.787400, 622.230018, 1244.460036, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y)
[Wed May 30 07:52:59 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49.gif
[Wed May 30 07:58:28 2012] Mean detx,y = (1733.99, -2759.37) 
[Wed May 30 07:58:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:58:33 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:58:33 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed May 30 07:58:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.0028, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src49.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 3e-14
[Wed May 30 08:34:42 2012] Flag b found in src. 49 procflags, skipping spectral fitting