[Tue May 29 19:41:00 2012] Detection parameters:
  Position = (331.3, 302.0) = 2 49 28.47 -31 12 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.9 +/- 20.9
  Background counts = 49.8
  Rate = 0.005 +/- 0.0006

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 2.39'
[Tue May 29 23:16:57 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Tue May 29 23:16:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.63"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May 30 00:48:52 2012] Spatial fit model total counts = 1723.360000, observed total counts = 1725.000000
[Wed May 30 00:48:52 2012] Offset between fit and detection position for source 40 = 2.555908 pixels
[Wed May 30 00:48:52 2012] 1652.723800 total counts/ 1566.410000 bgd. counts: snr = 2.180859
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.555908 pixels
  Position = (332.8, 300.0) = 2 49 27.96 -31 12 18.6
  Extent = 15.3 (15.2-30.5)", rotation angle = 0
  Source counts = 86.3 +/- 40.7
  Background counts = 1566.4
  Rate = 0.002 +/- 0.001
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:52 2012] Source is confused with source 41
[Wed May 30 03:48:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 15.25"
[Wed May 30 03:48:24 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.997
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 15.25"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed May 30 05:15:55 2012] Spatial fit model total counts = 3351.310000, observed total counts = 3269.000000
[Wed May 30 05:15:55 2012] Offset between fit and detection position for source 40 = 5.256592 pixels
[Wed May 30 05:15:55 2012] Warning, changing simple spatial fit ID from 15 to 7
[Wed May 30 05:15:55 2012] 3269.237000 total counts/ 2998.580000 bgd. counts: snr = 4.942668
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 5.256592 pixels
  Position = (331.9, 305.1) = 2 49 28.27 -31 11 56.1
  Extent = 14.9" x 14.9", rotation angle = 0
  Source counts = 270.7 +/- 57.2
  Background counts = 2998.6
  Rate = 0.007 +/- 0.002
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:59 2012] XMMSAS src. selection expression = ellipse(28822.664000, 26499.336000, 894.246026, 894.246026, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40_src.reg
[Wed May 30 07:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (280, 254) - (383, 357)
[Wed May 30 07:52:59 2012] XMMSAS bgd. selection expression = annulus(28822.664000, 26499.336000, 1490.410043, 2980.820086, X, Y) && !ellipse(27396.429800, 27229.205600, 938.304027, 938.304027, 0.000000, X, Y) && !ellipse(28241.211517, 26994.622162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.005960, 23890.969800, 463.037613, 234.630407, 60.777000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.952000, 28306.274000, 1221.224035, 1221.224035, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(32052.200300, 24687.607200, 558.410969, 558.410969, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(28839.660000, 27277.126000, 1209.960035, 1209.960035, 0.000000, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40.gif
[Wed May 30 07:58:35 2012] Mean detx,y = (-1397.64, -457.52) 
[Wed May 30 07:58:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:58:42 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:58:42 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed May 30 07:58:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00717, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src40.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 6.4e-14
[Wed May 30 08:34:42 2012] Flag c found in src. 40 procflags, skipping spectral fitting