[Tue May 29 19:41:00 2012] Detection parameters:
  Position = (338.3, 317.9) = 2 49 26.10 -31 11 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 14.6
  Background counts = 45.7
  Rate = 0.002 +/- 0.0004

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 3.21'
[Tue May 29 23:16:57 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Tue May 29 23:16:57 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.04"
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 30 00:48:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42.csv
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 30 00:48:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42.csv
[Wed May 30 00:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed May 30 00:48:52 2012] Spatial fit model total counts = 1037.600000, observed total counts = 1034.000000
[Wed May 30 00:48:52 2012] Offset between fit and detection position for source 31 = 7.302062 pixels
[Wed May 30 00:48:52 2012] 999.978400 total counts/ 930.186000 bgd. counts: snr = 2.288354
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 7.302062 pixels
  Position = (332.0, 314.1) = 2 49 28.21 -31 11 17.2
  Extent = 15.1 (13.1-16.1)", rotation angle = 0
  Source counts = 69.8 +/- 31.6
  Background counts = 930.2
  Rate = 0.002 +/- 0.0008
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:52 2012] Source is confused with source 9
[Wed May 30 03:48:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 15.12"
[Wed May 30 03:48:24 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.012
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 15.12"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src38.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src38 appears to have run properly
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:55 2012] Source 31 is offset by -1.678345 and -0.315520 pixels which is larger than
2 X fitted extent = 0.922395 x 0.922395, not incorporating fit results
[Wed May 30 05:15:55 2012] Warning, spatial fit 38 centroid is now closest to src. 9
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:59 2012] XMMSAS src. selection expression = ellipse(28839.660000, 27277.126000, 907.470026, 907.470026, 0.000000, X, Y)
[Wed May 30 07:52:59 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31_src.reg
[Wed May 30 07:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (280, 262) - (384, 366)
[Wed May 30 07:53:00 2012] XMMSAS bgd. selection expression = annulus(28839.660000, 27277.126000, 1512.450044, 3024.900087, X, Y) && !ellipse(27396.429800, 27229.205600, 938.304027, 938.304027, 0.000000, X, Y) && !ellipse(28241.211517, 26994.622162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.664000, 26499.336000, 1192.328034, 1192.328034, 0.000000, X, Y) && !ellipse(26941.005960, 23890.969800, 463.037613, 234.630407, 60.777000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.952000, 28306.274000, 1221.224035, 1221.224035, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(32052.200300, 24687.607200, 558.410969, 558.410969, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:53:00 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31.gif
[Wed May 30 08:02:13 2012] Mean detx,y = (-1308.44, 208.20) 
[Wed May 30 08:02:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 08:02:20 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 08:02:20 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May 30 08:02:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed May 30 08:31:41 2012] Not generating rmf since there are only 69 counts
[Wed May 30 08:31:41 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src31.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 1.7e-14
[Wed May 30 08:34:42 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Wed May 30 08:34:42 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Wed May 30 08:34:42 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting