[Tue May 29 19:40:59 2012] Detection parameters:
  Position = (445.9, 253.0) = 2 48 49.58 -31 15 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 745.4 +/- 33.5
  Background counts = 16.3
  Rate = 0.04 +/- 0.002

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 11.19'
[Tue May 29 23:16:57 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Tue May 29 23:16:57 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.02"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 30 00:48:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 30 00:48:52 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.728277 pixels away
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:48:24 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Wed May 30 03:48:24 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.02"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 30 05:15:55 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.728277 pixels away
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:58 2012] XMMSAS src. selection expression = ellipse(38742.911743, 21962.842499, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3_src.reg
[Wed May 30 07:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (408, 216) - (483, 291)
[Wed May 30 07:52:58 2012] XMMSAS bgd. selection expression = annulus(38742.911743, 21962.842499, 1087.500000, 2175.000000, X, Y) && !ellipse(36955.054840, 21189.452377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38172.539764, 23375.780060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41279.234680, 19863.603760, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3.gif
[Wed May 30 07:55:17 2012] Mean detx,y = (-12135.98, -2880.21) 
[Wed May 30 07:55:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:55:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:55:25 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 07:55:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 30 08:07:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 08:07:24 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.037, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src3.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 6.8e-13
[Wed May 30 08:34:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting