[Tue May 29 19:40:59 2012] Detection parameters: Position = (314.3, 329.8) = 2 49 34.21 -31 10 7.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 102.1 +/- 16.9 Background counts = 48.8 Rate = 0.003 +/- 0.0005 [Tue May 29 19:41:00 2012] Off-axis axis estimate = 2.55' [Tue May 29 23:16:57 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 7.70" [Tue May 29 23:16:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970 [Tue May 29 23:16:57 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.70" [Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23.ximg exists [Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23.csv [Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23_1.ximg exists [Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23.csv [Wed May 30 00:48:16 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Wed May 30 00:48:17 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly [Wed May 30 00:48:52 2012] Source 24 is offset by -0.956047 and 8.093097 pixels which is larger than 2 X fitted extent = 1.220855 x 1.220561, not incorporating fit results [Wed May 30 00:48:52 2012] Warning, spatial fit 23 centroid is now closest to src. 18 [Wed May 30 00:48:52 2012] Spatial fit model total counts = 967.360000, observed total counts = 965.000000 [Wed May 30 00:48:52 2012] Offset between fit and detection position for source 24 = 3.896111 pixels [Wed May 30 00:48:52 2012] Warning, changing simple spatial fit ID from 23 to 44 [Wed May 30 00:48:52 2012] 930.768300 total counts/ 860.722000 bgd. counts: snr = 2.387557 Spatial fit parameters: Offset between fit and detection position for source 24 = 3.896111 pixels Position = (314.6, 325.9) = 2 49 34.12 -31 10 25.8 Extent = 15.4 (15.4-30.8)", rotation angle = 0 Source counts = 70.0 +/- 30.5 Background counts = 860.7 Rate = 0.002 +/- 0.0008 [Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000 [Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 00:48:52 2012] Assessing source extent using major axis lower bound [Wed May 30 00:48:52 2012] Source does appear to be extended [Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 00:48:52 2012] Source is confused with source 23 [Wed May 30 03:48:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 15.39" [Wed May 30 03:48:24 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.981 [Wed May 30 03:48:24 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 15.39" [Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23.ximg exists [Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23.csv [Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23_1.ximg exists [Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23.csv [Wed May 30 05:15:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23.csv [Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23.csv [Wed May 30 05:15:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 05:15:55 2012] Warning, spatial fit 23 centroid is now closest to src. 18 [Wed May 30 05:15:55 2012] Spatial fit model total counts = 966.359000, observed total counts = 965.000000 [Wed May 30 05:15:55 2012] Offset between fit and detection position for source 24 = 0.134391 pixels [Wed May 30 05:15:55 2012] Warning, changing simple spatial fit ID from 23 to 39 [Wed May 30 05:15:55 2012] 931.844800 total counts/ 862.469000 bgd. counts: snr = 2.362307 Spatial fit parameters: Offset between fit and detection position for source 24 = 0.134391 pixels Position = (314.5, 325.9) = 2 49 34.17 -31 10 25.8 Extent = 15.3 (14.7-15.4)", rotation angle = 0 Source counts = 69.4 +/- 30.5 Background counts = 862.5 Rate = 0.002 +/- 0.0008 [Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000 [Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 05:15:55 2012] Assessing source extent using major axis lower bound [Wed May 30 05:15:55 2012] Source does appear to be extended [Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 07:52:59 2012] XMMSAS src. selection expression = ellipse(27309.952000, 28306.274000, 915.918026, 915.918026, 0.000000, X, Y) [Wed May 30 07:52:59 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24_src.reg [Wed May 30 07:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (262, 273) - (367, 379) [Wed May 30 07:52:59 2012] XMMSAS bgd. selection expression = annulus(27309.952000, 28306.274000, 1526.530044, 3053.060088, X, Y) && !ellipse(27396.429800, 27229.205600, 938.304027, 938.304027, 0.000000, X, Y) && !ellipse(28241.211517, 26994.622162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.551600, 24914.787400, 497.784014, 497.784014, 0.000000, X, Y) && !ellipse(28822.664000, 26499.336000, 1192.328034, 1192.328034, 0.000000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(28839.660000, 27277.126000, 1209.960035, 1209.960035, 0.000000, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 30 07:52:59 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24.gif [Wed May 30 08:00:04 2012] Mean detx,y = (232.33, 695.92) [Wed May 30 08:00:05 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 30 08:00:11 2012] Binned source spectrum to 10 counts/bin [Wed May 30 08:00:11 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed May 30 08:00:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24_bgd.pi.gz [Wed May 30 08:29:48 2012] Not generating rmf since there are only 69 counts [Wed May 30 08:29:48 2012] rmf not generated due to insufficient counts [Wed May 30 08:33:39 2012] Updating aperture counts using extracted products [Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src24.arf [Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 08:33:39 2012] Updating source flux to 1.7e-14 [Wed May 30 08:34:42 2012] Flag b found in src. 24 procflags, skipping spectral fitting [Wed May 30 08:34:42 2012] Flag c found in src. 24 procflags, skipping spectral fitting [Wed May 30 08:34:42 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting