[Tue May 29 19:40:59 2012] Detection parameters:
  Position = (309.4, 239.9) = 2 49 35.88 -31 16 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1198.6 +/- 112.2
  Background counts = 29.1
  Rate = 0.03 +/- 0.003

[Tue May 29 19:41:00 2012] Off-axis axis estimate = 4.32'
[Tue May 29 23:16:57 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue May 29 23:16:57 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Tue May 29 23:16:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.531
[Tue May 29 23:16:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.59"
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3.csv
[Wed May 30 00:48:16 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 00:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3.csv
[Wed May 30 00:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 00:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 30 00:48:17 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 00:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 30 00:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:52 2012] Spatial fit model total counts = 495.114000, observed total counts = 435.000000
[Wed May 30 00:48:52 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 00:48:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:52 2012] Assessing source extent using major
[Wed May 30 00:48:52 2012] Source does appear to be extended
[Wed May 30 00:48:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:48:24 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:48:24 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Wed May 30 03:48:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.531
[Wed May 30 03:48:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.59"
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 30 05:15:35 2012] Fit fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 30 05:15:35 2012] fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 30 05:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 30 05:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:55 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.218195 pixels away
[Wed May 30 05:15:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:55 2012] Assessing source extent using major
[Wed May 30 05:15:55 2012] Source does appear to be extended
[Wed May 30 05:15:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 07:52:58 2012] Counts = 1198.625977, rescaling region sizes by 2.000000
[Wed May 30 07:52:58 2012] XMMSAS src. selection expression = ellipse(26868.909180, 20820.228073, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing source region out to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 07:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (234, 165) - (384, 315)
[Wed May 30 07:52:58 2012] XMMSAS bgd. selection expression = annulus(26868.909180, 20820.228073, 4350.000000, 8700.000000, X, Y) && !ellipse(27396.429800, 27229.205600, 938.304027, 938.304027, 0.000000, X, Y) && !ellipse(22709.165200, 23971.979000, 404.504012, 404.504012, 0.000000, X, Y) && !ellipse(28241.211517, 26994.622162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.550659, 26494.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.606842, 19964.582489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.084656, 26139.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35042.471000, 28394.750000, 508.686415, 508.686415, 0.000000, X, Y) && !ellipse(25130.551600, 24914.787400, 497.784014, 497.784014, 0.000000, X, Y) && !ellipse(28822.664000, 26499.336000, 1192.328034, 1192.328034, 0.000000, X, Y) && !ellipse(26941.005960, 23890.969800, 463.037613, 234.630407, 60.777000, X, Y) && !ellipse(28568.234000, 25892.070000, 1247.144036, 1247.144036, 0.000000, X, Y) && !ellipse(35445.038000, 28690.416000, 1707.224049, 505.960815, 328.620000, X, Y) && !ellipse(25359.848938, 26204.464203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.722778, 26575.754120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.999298, 25216.177338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.952000, 28306.274000, 1221.224035, 1221.224035, 0.000000, X, Y) && !ellipse(28706.324860, 28394.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.744995, 25286.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18278.887800, 26473.366000, 762.058422, 373.717611, 104.335606, X, Y) && !ellipse(22657.466740, 25353.648000, 445.961613, 445.961613, 0.000000, X, Y) && !ellipse(29562.404541, 27088.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.532000, 26866.120000, 1122.256032, 1122.256032, 0.000000, X, Y) && !ellipse(32052.200300, 24687.607200, 558.410969, 558.410969, 0.000000, X, Y) && !ellipse(34260.316925, 30074.918121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.828000, 24493.126000, 1209.960035, 1209.960035, 345.356100, X, Y) && !ellipse(28839.660000, 27277.126000, 1209.960035, 1209.960035, 0.000000, X, Y) && !ellipse(26825.706543, 28835.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.510162, 28667.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28869.338348, 29151.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.951080, 29272.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29119.564240, 25220.659027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 07:52:58 2012] Writing fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1.gif
[Wed May 30 07:55:28 2012] Mean detx,y = (-875.07, -6326.22) 
[Wed May 30 07:55:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 07:56:46 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 07:56:46 2012] Setting source spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 07:56:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 08:07:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 08:07:29 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:39 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:39 2012] Error reading totcts from fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.0311, arf fullrun_mos2_xmm0146510401_pi300-10000_pass1_cl_src1.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 4.5e-13
[Wed May 30 08:34:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting