[Tue May 29 19:40:27 2012] Detection parameters:
  Position = (439.4, 269.6) = 2 48 51.79 -31 14 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 10.4
  Background counts = 13.7
  Rate = 0.003 +/- 0.0005

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 10.43'
[Tue May 29 21:52:25 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Tue May 29 21:52:25 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.214
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 11.64"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28.ximg exists
[Tue May 29 23:16:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed May 30 00:48:42 2012] Source 56 is offset by 4.932619 and 5.054076 pixels which is larger than
2 X fitted extent = 1.381812 x 1.381812, not incorporating fit results
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 180.924000, observed total counts = 181.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 56 = 0.628744 pixels
[Wed May 30 00:48:42 2012] 179.416700 total counts/ 133.352000 bgd. counts: snr = 3.989041
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.628744 pixels
  Position = (440.0, 269.6) = 2 48 51.58 -31 14 30.0
  Extent = 6.8 (4.6-9.7)", rotation angle = 0
  Source counts = 46.1 +/- 13.4
  Background counts = 133.4
  Rate = 0.001 +/- 0.0004
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Wed May 30 02:48:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.81"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed May 30 05:15:50 2012] Spatial fit model total counts = 182.896000, observed total counts = 184.000000
[Wed May 30 05:15:50 2012] Offset between fit and detection position for source 56 = 0.079151 pixels
[Wed May 30 05:15:50 2012] 181.091300 total counts/ 138.176000 bgd. counts: snr = 3.650866
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.079151 pixels
  Position = (440.0, 269.7) = 2 48 51.60 -31 14 29.8
  Extent = 6.6 (4.4-8.9)", rotation angle = 0
  Source counts = 42.9 +/- 13.5
  Background counts = 138.2
  Rate = 0.001 +/- 0.0004
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:54 2012] XMMSAS src. selection expression = ellipse(38227.303680, 23414.870800, 393.117611, 393.117611, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56_src.reg
[Wed May 30 06:46:54 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (417, 247) - (463, 292)
[Wed May 30 06:46:54 2012] XMMSAS bgd. selection expression = annulus(38227.303680, 23414.870800, 655.196019, 1310.392038, X, Y) && !ellipse(38744.268463, 21963.623077, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56.gif
[Wed May 30 06:54:31 2012] Mean detx,y = (-1408.71, 11206.55) 
[Wed May 30 06:54:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:54:37 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:54:37 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed May 30 06:54:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed May 30 07:44:44 2012] Not generating rmf since there are only 42 counts
[Wed May 30 07:44:44 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src56.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 2.1e-14
[Wed May 30 08:33:41 2012] Flag b found in src. 56 procflags, skipping spectral fitting
[Wed May 30 08:33:41 2012] Source 56 has fewer than 100.000000 counts, skipping spectral fitting