[Tue May 29 19:40:26 2012] Detection parameters:
  Position = (140.0, 397.0) = 2 50 33.25 -31 5 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.3 +/- 13.1
  Background counts = 11.8
  Rate = 0.002 +/- 0.0003

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 13.53'
[Tue May 29 21:52:25 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Tue May 29 21:52:25 2012] source mask rpix=3.0, npix_max = 49, mask sum = 64, frac = 1.282
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.19"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed May 30 00:48:42 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.447101 pixels away
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Wed May 30 02:48:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 64, frac = 1.282
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.19"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed May 30 05:15:50 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.447890 pixels away
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:54 2012] XMMSAS src. selection expression = ellipse(12131.014130, 34492.621368, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5_src.reg
[Wed May 30 06:46:54 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (102, 360) - (177, 435)
[Wed May 30 06:46:54 2012] XMMSAS bgd. selection expression = annulus(12131.014130, 34492.621368, 1087.500000, 2175.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5.gif
[Wed May 30 06:54:48 2012] Mean detx,y = (4316.66, -16544.45) 
[Wed May 30 06:54:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:55:01 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:55:01 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 06:55:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 30 07:44:52 2012] Not generating rmf since there are only 92 counts
[Wed May 30 07:44:52 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00239, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src5.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 8e-14
[Wed May 30 08:33:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting