[Tue May 29 19:40:27 2012] Detection parameters:
  Position = (285.8, 317.1) = 2 49 43.89 -31 11 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 13.2
  Background counts = 40.1
  Rate = 0.002 +/- 0.0004

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 1.64'
[Tue May 29 21:52:25 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue May 29 21:52:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.25"
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43.csv
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43.csv
[Tue May 29 23:16:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed May 30 00:48:42 2012] Source 47 is offset by -3.209357 and -7.443173 pixels which is larger than
2 X fitted extent = 0.832943 x 0.832943, not incorporating fit results
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed May 30 02:48:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.25"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed May 30 05:15:50 2012] Spatial fit model total counts = 625.000000, observed total counts = 625.000000
[Wed May 30 05:15:50 2012] Offset between fit and detection position for source 47 = 0.369294 pixels
[Wed May 30 05:15:50 2012] 621.709400 total counts/ 608.509000 bgd. counts: snr = 0.535123
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.369294 pixels
  Position = (285.5, 317.4) = 2 49 43.99 -31 11 3.0
  Extent = 2.7 (0.2-3.6)", rotation angle = 0
  Source counts = 13.2 +/- 24.9
  Background counts = 608.5
  Rate = 0.0003 +/- 0.0007
  Deleting source due to low Poisson probability