[Tue May 29 19:40:27 2012] Detection parameters:
  Position = (301.5, 326.9) = 2 49 38.57 -31 10 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 15.6
  Background counts = 44.2
  Rate = 0.002 +/- 0.0004

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 2.08'
[Tue May 29 21:52:25 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Tue May 29 21:52:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.018
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.47"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed May 30 00:48:42 2012] Source 46 is offset by 6.966860 and -5.914829 pixels which is larger than
2 X fitted extent = 2.110464 x 2.110464, not incorporating fit results
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 30 02:48:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.018
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.47"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed May 30 05:15:50 2012] Source 46 is offset by 6.824469 and -5.760921 pixels which is larger than
2 X fitted extent = 1.800676 x 1.800676, not incorporating fit results
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:54 2012] XMMSAS src. selection expression = ellipse(26179.692780, 28395.197906, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46_src.reg
[Wed May 30 06:46:54 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (264, 289) - (339, 364)
[Wed May 30 06:46:54 2012] XMMSAS bgd. selection expression = annulus(26179.692780, 28395.197906, 1087.500000, 2175.000000, X, Y) && !ellipse(27396.281200, 27231.535400, 1060.128031, 1060.128031, 0.000000, X, Y) && !ellipse(27508.508392, 25634.567474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.271637, 26051.975250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.643494, 28299.112396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.615784, 29008.804382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.688416, 27622.146301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.972000, 29421.190600, 1290.352037, 1290.352037, 0.000000, X, Y) && !ellipse(27463.672913, 29524.121674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.962189, 29355.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.038200, 29590.525200, 1295.160037, 1295.160037, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46.gif
[Wed May 30 06:55:16 2012] Mean detx,y = (1039.01, -1534.96) 
[Wed May 30 06:55:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:55:23 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:55:23 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May 30 06:55:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed May 30 07:45:04 2012] Not generating rmf since there are only 84 counts
[Wed May 30 07:45:04 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00232, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src46.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 2.3e-14
[Wed May 30 08:33:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting