[Tue May 29 19:40:27 2012] Detection parameters:
  Position = (308.5, 338.8) = 2 49 36.19 -31 9 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.1 +/- 14.2
  Background counts = 42.4
  Rate = 0.002 +/- 0.0004

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 3.02'
[Tue May 29 21:52:25 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Tue May 29 21:52:25 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.94"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed May 30 00:48:42 2012] Source 43 is offset by 7.503595 and -1.991136 pixels which is larger than
2 X fitted extent = 0.912386 x 0.912386, not incorporating fit results
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 789.383000, observed total counts = 791.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 43 = 3.713778 pixels
[Wed May 30 00:48:42 2012] Warning, changing simple spatial fit ID from 35 to 37
[Wed May 30 00:48:42 2012] 748.600000 total counts/ 645.911000 bgd. counts: snr = 4.040523
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.713778 pixels
  Position = (312.2, 338.7) = 2 49 34.94 -31 9 30.3
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 102.7 +/- 27.4
  Background counts = 645.9
  Rate = 0.003 +/- 0.0007
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:48:42 2012] Source is confused with source 42
[Wed May 30 00:48:42 2012] Source is confused with source 44
[Wed May 30 00:48:42 2012] Source is confused with source 41
[Wed May 30 02:48:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 16.13"
[Wed May 30 02:48:42 2012] source mask rpix=3.7, npix_max = 70, mask sum = 62, frac = 0.875
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 16.13"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed May 30 05:15:50 2012] Warning, spatial fit 31 centroid is now closest to src. 44
[Wed May 30 05:15:50 2012] Spatial fit model total counts = 790.263000, observed total counts = 791.000000
[Wed May 30 05:15:50 2012] Offset between fit and detection position for source 43 = 2.524381 pixels
[Wed May 30 05:15:50 2012] Warning, changing simple spatial fit ID from 31 to 32
[Wed May 30 05:15:50 2012] 695.185600 total counts/ 609.936000 bgd. counts: snr = 3.451836
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.524381 pixels
  Position = (309.7, 338.7) = 2 49 35.79 -31 9 30.0
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 85.2 +/- 26.4
  Background counts = 609.9
  Rate = 0.002 +/- 0.0007
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:54 2012] XMMSAS src. selection expression = ellipse(26892.972000, 29421.190600, 967.764028, 967.764028, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43_src.reg
[Wed May 30 06:46:54 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (254, 283) - (365, 394)
[Wed May 30 06:46:54 2012] XMMSAS bgd. selection expression = annulus(26892.972000, 29421.190600, 1612.940046, 3225.880093, X, Y) && !ellipse(27396.281200, 27231.535400, 1060.128031, 1060.128031, 0.000000, X, Y) && !ellipse(27508.508392, 25634.567474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.271637, 26051.975250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.643494, 28299.112396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.763062, 27197.851379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.615784, 29008.804382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.688416, 27622.146301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.692780, 28395.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.672913, 29524.121674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29789.604000, 25644.814000, 1260.880036, 1260.880036, 0.000000, X, Y) && !ellipse(27954.962189, 29355.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.038200, 29590.525200, 1295.160037, 1295.160037, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43.gif
[Wed May 30 06:55:42 2012] Mean detx,y = (2124.46, -1028.63) 
[Wed May 30 06:55:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:55:51 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:55:51 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 30 06:55:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed May 30 07:45:11 2012] Not generating rmf since there are only 85 counts
[Wed May 30 07:45:11 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00226, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src43.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 2.2e-14
[Wed May 30 08:33:41 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Wed May 30 08:33:41 2012] Flag c found in src. 43 procflags, skipping spectral fitting
[Wed May 30 08:33:41 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting