[Tue May 29 19:40:26 2012] Detection parameters:
  Position = (314.7, 289.4) = 2 49 34.07 -31 13 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 17.6
  Background counts = 45.6
  Rate = 0.003 +/- 0.0005

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 1.35'
[Tue May 29 21:52:25 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Tue May 29 21:52:25 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.11"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 1749.840000, observed total counts = 1751.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 33 = 0.310867 pixels
[Wed May 30 00:48:42 2012] Warning, changing simple spatial fit ID from 20 to 11
[Wed May 30 00:48:42 2012] 1707.019600 total counts/ 1655.320000 bgd. counts: snr = 1.270709
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.310867 pixels
  Position = (315.0, 289.5) = 2 49 33.97 -31 13 4.3
  Extent = 7.7 (4.4-13.4)", rotation angle = 0
  Source counts = 51.7 +/- 41.3
  Background counts = 1655.3
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability