[Tue May 29 19:40:26 2012] Detection parameters:
  Position = (315.4, 313.9) = 2 49 33.85 -31 11 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2859.2 +/- 66.2
  Background counts = 48.3
  Rate = 0.08 +/- 0.002

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 1.66'
[Tue May 29 21:52:25 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue May 29 21:52:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1.csv
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1.csv
[Tue May 29 23:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 5855.010000, observed total counts = 5855.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 3 = 0.183573 pixels
[Wed May 30 00:48:42 2012] 5815.280000 total counts/ 2913.000000 bgd. counts: snr = 53.773594
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.183573 pixels
  Position = (315.4, 313.7) = 2 49 33.83 -31 11 18.8
  Extent = 11.8 (11.2-12.6)", rotation angle = 0
  Source counts = 2902.3 +/- 76.3
  Background counts = 2913.0
  Rate = 0.08 +/- 0.002
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Wed May 30 02:48:42 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.81"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 05:15:50 2012] Spatial fit model total counts = 8118.760000, observed total counts = 8121.000000
[Wed May 30 05:15:50 2012] Offset between fit and detection position for source 3 = 0.157720 pixels
[Wed May 30 05:15:50 2012] 8075.360000 total counts/ 4574.820000 bgd. counts: snr = 51.754491
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.157720 pixels
  Position = (315.5, 313.6) = 2 49 33.83 -31 11 19.5
  Extent = 13.3 (12.7-13.9)", rotation angle = 0
  Source counts = 3500.5 +/- 89.9
  Background counts = 4574.8
  Rate = 0.09 +/- 0.002
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:53 2012] Counts = 3500.540000, rescaling region sizes by 2.000000
[Wed May 30 06:46:53 2012] XMMSAS src. selection expression = ellipse(27396.281200, 27231.535400, 1590.192046, 1590.192046, 0.000000, X, Y)
[Wed May 30 06:46:53 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_src.reg
[Wed May 30 06:46:53 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (224, 222) - (407, 405)
[Wed May 30 06:46:53 2012] XMMSAS bgd. selection expression = annulus(27396.281200, 27231.535400, 5300.640153, 10601.280305, X, Y) && !ellipse(38744.268463, 21963.623077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22709.924800, 23966.949400, 374.472011, 374.472011, 0.000000, X, Y) && !ellipse(37326.567780, 34573.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.110306, 35848.009093, 622.781838, 456.294822, 330.492260, X, Y) && !ellipse(27045.740200, 20678.835800, 350.181610, 350.181610, 0.000000, X, Y) && !ellipse(19509.912200, 32843.751800, 488.908814, 488.908814, 0.000000, X, Y) && !ellipse(36981.005096, 21202.053146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.538000, 28410.580000, 607.510417, 607.510417, 0.000000, X, Y) && !ellipse(27508.508392, 25634.567474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25133.437435, 24895.447630, 529.313277, 377.411596, 338.865915, X, Y) && !ellipse(27005.654880, 23912.386200, 624.663218, 624.663218, 0.000000, X, Y) && !ellipse(29198.306780, 20156.929600, 293.649608, 293.649608, 0.000000, X, Y) && !ellipse(33928.215400, 19932.225200, 474.905614, 474.905614, 0.000000, X, Y) && !ellipse(25978.271637, 26051.975250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.643494, 28299.112396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36221.548000, 29491.150000, 1709.528049, 1674.232048, 330.756000, X, Y) && !ellipse(29346.763062, 27197.851379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.237000, 16841.126373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.300903, 25295.416687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38086.415924, 33458.067963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.615784, 29008.804382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38227.303680, 23414.870800, 524.156815, 524.156815, 0.000000, X, Y) && !ellipse(25832.688416, 27622.146301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.692780, 28395.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.636536, 32027.354980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.972000, 29421.190600, 1290.352037, 1290.352037, 0.000000, X, Y) && !ellipse(27463.672913, 29524.121674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32063.460724, 35853.690277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29789.604000, 25644.814000, 1260.880036, 1260.880036, 0.000000, X, Y) && !ellipse(27954.962189, 29355.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35345.374298, 18594.274078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18820.968445, 35890.491638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25731.181335, 38519.976898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.038200, 29590.525200, 1295.160037, 1295.160037, 0.000000, X, Y)
[Wed May 30 06:46:53 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3.gif
[Wed May 30 06:46:58 2012] Mean detx,y = (99.77, -134.71) 
[Wed May 30 06:46:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:49:59 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:49:59 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 06:49:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 08:33:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:38 2012] Using photon index=1.80, rate=0.0928, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3.arf
[Wed May 30 08:33:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:38 2012] Updating source flux to 7.9e-13
[Wed May 30 08:34:42 2012] Reading fit data from xmm0146510401/analysis//spectral/fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_pl.csv
[Wed May 30 08:34:42 2012] Spectral fit parameter nH value = 4.68434e+21
[Wed May 30 08:34:42 2012] Spectral fit parameter PhoIndex value = 4.39891
[Wed May 30 08:34:42 2012] Failed to get F(0.3-8.0) from xmm0146510401/analysis//spectral/fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed May 30 08:34:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:34:42 2012] Using Nh = 4.7e+21, photon index=4.40, rate=0.0928, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src3.arf
[Wed May 30 08:34:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:34:42 2012] Updating source flux to 5.2e-13