[Tue May 29 19:40:26 2012] Detection parameters:
  Position = (457.8, 189.0) = 2 48 45.49 -31 20 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 10.3
  Background counts = 13.2
  Rate = 0.001 +/- 0.0003

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 14.02'
[Tue May 29 21:52:25 2012] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 13.44"
[Tue May 29 21:52:25 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.087
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 13.44"
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50.csv
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50.csv
[Tue May 29 23:16:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 177.019000, observed total counts = 169.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 28 = 0.685204 pixels
[Wed May 30 00:48:42 2012] 176.572000 total counts/ 131.538000 bgd. counts: snr = 3.926584
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.685204 pixels
  Position = (458.4, 189.4) = 2 48 45.29 -31 20 19.0
  Extent = 8.1 (5.8-11.0)", rotation angle = 0
  Source counts = 45.0 +/- 13.3
  Background counts = 131.5
  Rate = 0.001 +/- 0.0004
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:48:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Wed May 30 02:48:42 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.131
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.05"
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42.ximg exists
[Wed May 30 03:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42.csv
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42_1.ximg exists
[Wed May 30 03:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42.csv
[Wed May 30 03:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Wed May 30 03:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42.csv
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Wed May 30 03:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42.csv
[Wed May 30 03:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 05:15:50 2012] Warning, spatial fit 42 centroid is now closest to src. 27
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:46:54 2012] XMMSAS src. selection expression = ellipse(39831.262600, 16427.457940, 483.105614, 483.105614, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28_src.reg
[Wed May 30 06:46:54 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (431, 162) - (486, 217)
[Wed May 30 06:46:54 2012] XMMSAS bgd. selection expression = annulus(39831.262600, 16427.457940, 805.176023, 1610.352046, X, Y) && !ellipse(41103.259338, 18177.784943, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 06:46:54 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28.gif
[Wed May 30 06:57:18 2012] Mean detx,y = (-7915.98, 14163.28) 
[Wed May 30 06:57:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:57:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:57:28 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May 30 06:57:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed May 30 07:52:50 2012] Not generating rmf since there are only 45 counts
[Wed May 30 07:52:50 2012] rmf not generated due to insufficient counts
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src28.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 2.8e-14
[Wed May 30 08:33:41 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting