[Tue May 29 19:40:26 2012] Detection parameters: Position = (321.8, 297.1) = 2 49 31.67 -31 12 31.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 224.3 +/- 22.7 Background counts = 47.9 Rate = 0.006 +/- 0.0006 [Tue May 29 19:40:27 2012] Off-axis axis estimate = 1.70' [Tue May 29 21:52:25 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 7.28" [Tue May 29 21:52:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847 [Tue May 29 21:52:25 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.28" [Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9.ximg exists [Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9.csv [Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9_1.ximg exists [Tue May 29 23:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9.csv [Tue May 29 23:16:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Tue May 29 23:16:57 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Wed May 30 00:48:42 2012] Warning, spatial fit 9 centroid is now closest to src. 19 [Wed May 30 00:48:42 2012] Spatial fit model total counts = 1201.860000, observed total counts = 1201.000000 [Wed May 30 00:48:42 2012] Offset between fit and detection position for source 18 = 0.310019 pixels [Wed May 30 00:48:42 2012] Warning, changing simple spatial fit ID from 9 to 24 [Wed May 30 00:48:42 2012] 1222.259100 total counts/ 1212.000000 bgd. counts: snr = 0.294685 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.310019 pixels Position = (321.9, 296.8) = 2 49 31.63 -31 12 32.4 Extent = 1.8" x 1.8", rotation angle = 0 Source counts = 10.3 +/- 35.0 Background counts = 1212.0 Rate = 0.0003 +/- 0.0009 Deleting source due to low Poisson probability