[Tue May 29 19:40:26 2012] Detection parameters:
  Position = (410.7, 332.8) = 2 49 1.55 -31 10 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 11.9
  Background counts = 19.1
  Rate = 0.003 +/- 0.0006

[Tue May 29 19:40:27 2012] Off-axis axis estimate = 8.51'
[Tue May 29 21:52:25 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:52:25 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Tue May 29 21:52:25 2012] source mask rpix=2.5, npix_max = 34, mask sum = 20, frac = 0.572
[Tue May 29 21:52:25 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.68"
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src18.ximg exists
[Tue May 29 23:16:56 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue May 29 23:16:56 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_src18 appears to have run properly
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 29 23:16:57 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue May 29 23:16:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 29 23:16:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:48:42 2012] Source 13 is offset by -1.842832 and -4.752591 pixels which is larger than
2 X fitted extent = 1.193324 x 1.193324, not incorporating fit results
[Wed May 30 00:48:42 2012] Spatial fit model total counts = 297.226000, observed total counts = 294.000000
[Wed May 30 00:48:42 2012] Offset between fit and detection position for source 13 = 9.155037 pixels
[Wed May 30 00:48:42 2012] 237.108000 total counts/ 119.166000 bgd. counts: snr = 10.804192
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 9.155037 pixels
  Position = (416.9, 339.5) = 2 48 59.46 -31 9 26.1
  Extent = 21.4 (15.5-42.7)" x 20.9 (20.0-21.4)", rotation angle = 331 (272-0) degrees
  Source counts = 117.9 +/- 15.4
  Background counts = 119.2
  Rate = 0.003 +/- 0.0004
[Wed May 30 00:48:42 2012] Vigneting correction estimate = 1.000000
[Wed May 30 00:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 00:48:42 2012] Assessing source extent using major axis lower bound
[Wed May 30 00:48:42 2012] Source does appear to be extended
[Wed May 30 00:48:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Wed May 30 02:48:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 02:48:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 02:48:42 2012] Initial guess for spatial extent in simple fitting = 21.15"
[Wed May 30 02:48:42 2012] source mask rpix=4.9, npix_max = 114, mask sum = 84, frac = 0.730
[Wed May 30 02:48:42 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 21.15"
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17.csv
[Wed May 30 03:48:23 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed May 30 03:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17.csv
[Wed May 30 03:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed May 30 03:48:24 2012] fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May 30 03:48:24 2012] Fit fullrun_mos1_xmm0146510401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed May 30 05:15:50 2012] Source 13 is offset by 4.506207 and 6.944874 pixels which is larger than
2 X fitted extent = 1.200538 x 1.200538, not incorporating fit results
[Wed May 30 05:15:50 2012] Warning, spatial fit 17 centroid is now closest to src. 16
[Wed May 30 05:15:50 2012] Vigneting correction estimate = 1.000000
[Wed May 30 05:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 05:15:50 2012] Assessing source extent using major axis lower bound
[Wed May 30 05:15:50 2012] Source does appear to be extended
[Wed May 30 05:15:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Wed May 30 06:46:53 2012] XMMSAS src. selection expression = ellipse(36221.548000, 29491.150000, 1282.146037, 1255.674036, 330.756000, X, Y)
[Wed May 30 06:46:53 2012] Writing source region out to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13_src.reg
[Wed May 30 06:46:53 2012] Extracting stamp from image fullrun_mos1_xmm0146510401_pi300-10000_cl_sm2.00.img.gz, (343, 266) - (491, 413)
[Wed May 30 06:46:53 2012] XMMSAS bgd. selection expression = annulus(36221.548000, 29491.150000, 2136.910061, 4273.820123, X, Y) && !ellipse(37326.567780, 34573.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.538000, 28410.580000, 607.510417, 607.510417, 0.000000, X, Y) && !ellipse(38086.415924, 33458.067963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.636536, 32027.354980, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 06:46:53 2012] Writing fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13.gif
[Wed May 30 06:52:34 2012] Mean detx,y = (4056.53, 7939.87) 
[Wed May 30 06:52:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 06:53:16 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 06:53:16 2012] Setting source spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 30 06:53:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 30 08:33:38 2012] Updating aperture counts using extracted products
[Wed May 30 08:33:38 2012] Error reading totcts from fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 30 08:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 08:33:39 2012] Using photon index=1.80, rate=0.00313, arf fullrun_mos1_xmm0146510401_pi300-10000_pass1_cl_src13.arf
[Wed May 30 08:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 08:33:39 2012] Updating source flux to 3.9e-14
[Wed May 30 08:33:41 2012] Flag b found in src. 13 procflags, skipping spectral fitting