[Fri Aug 31 14:26:06 2012] Detection parameters:
  Position = (295.7, 274.9) = 16 5 45.88 25 51 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3214.3 +/- 68.3
  Background counts = 31.1
  Rate = 0.2 +/- 0.004

[Fri Aug 31 14:26:06 2012] Off-axis axis estimate = 1.72'
[Fri Aug 31 14:39:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:39:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Aug 31 14:39:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Aug 31 14:39:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Aug 31 14:48:01 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 14:48:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 14:48:01 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 14:48:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 14:48:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:48:01 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 14:48:01 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 14:48:01 2012] Fit fullrun_mos1_xmm0146500201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 31 14:55:20 2012] Spatial fit model total counts = 2152.000000, observed total counts = 2152.000000
[Fri Aug 31 14:55:20 2012] Offset between fit and detection position for source 1 = 0.062868 pixels
[Fri Aug 31 14:55:20 2012] 2153.391000 total counts/ 481.361000 bgd. counts: snr = 76.209413
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.062868 pixels
  Position = (295.7, 274.8) = 16 5 45.88 25 51 45.4
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 1672.0 +/- 46.4
  Background counts = 481.4
  Rate = 0.2 +/- 0.005
[Fri Aug 31 14:55:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:55:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:55:20 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 14:55:20 2012] Source does appear to be extended
[Fri Aug 31 14:55:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 15:05:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 15:05:36 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Fri Aug 31 15:05:36 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.203
[Fri Aug 31 15:05:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Fri Aug 31 15:13:48 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 15:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 15:13:48 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 15:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 15:13:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 15:13:48 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 15:13:48 2012] fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 15:13:48 2012] Fit fullrun_mos1_xmm0146500201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 31 15:18:56 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Fri Aug 31 15:18:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 15:18:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 15:18:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 15:18:56 2012] Source does appear to be extended
[Fri Aug 31 15:18:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 15:23:57 2012] Counts = 1672.030000, rescaling region sizes by 2.000000
[Fri Aug 31 15:23:57 2012] XMMSAS src. selection expression = ellipse(25677.868800, 23858.447800, 691.006820, 691.006820, 0.000000, X, Y)
[Fri Aug 31 15:23:57 2012] Writing source region out to fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 31 15:23:57 2012] Extracting stamp from image fullrun_mos1_xmm0146500201_pi300-10000_cl_sm2.00.img.gz, (256, 235) - (335, 315)
[Fri Aug 31 15:23:57 2012] XMMSAS bgd. selection expression = annulus(25677.868800, 23858.447800, 2303.356066, 4606.712133, X, Y) && !ellipse(22229.099457, 26730.478607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24140.863700, 27331.394400, 356.953610, 289.092008, 127.006203, X, Y) && !ellipse(21527.874876, 24702.911400, 423.072812, 423.072812, 0.000000, X, Y)
[Fri Aug 31 15:23:57 2012] Writing fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 31 15:23:58 2012] Mean detx,y = (326.94, -231.50) 
[Fri Aug 31 15:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 15:24:07 2012] grppha failed
[Fri Aug 31 15:24:08 2012] Setting source spectrum file to fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 15:24:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 31 15:26:23 2012] Updating aperture counts using extracted products
[Fri Aug 31 15:26:23 2012] Error reading totcts from fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 15:26:23 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 15:26:24 2012] Source 1 has no response, skipping
[Fri Aug 31 15:26:25 2012] xmm0146500201/analysis//spectral/fullrun_mos1_xmm0146500201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete